B. Adhikari, T. Howes, B. R. Bhandari, and V. Troung, Surface stickiness of drops of carbohydrate and organic acid solutions during convective drying: experiments and modeling, Dry. Technol, vol.21, pp.839-873, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01851825

B. Adhikari, T. Howes, B. R. Bhandari, and V. Troung, Effect of addition of maltodextrin on drying kinetics and stickiness of sugar and acid-rich foods during convective drying: experiments and modelling, J. Food Eng, vol.62, pp.53-68, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01851826

B. Adhikari, T. Howes, D. Lecomte, and B. R. Bhandari, A glass transition temperature approach for the prediction of the surface stickiness of a drying droplet during spray drying, Powder Technol, vol.149, pp.168-179, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01847592

R. J. Aguerre and C. Suarez, Diffusion of bound water in starchy materials: Application to drying, J. Food Eng, vol.64, pp.389-395, 2004.

L. Alamilla-beltrán, J. J. Chanona-pérez, A. R. Jiménez-aparicio, and G. F. Gutiérrez-lópez, Description of morphological changes of particles along spray drying, J. Food Eng, vol.67, pp.179-184, 2005.

E. Ben-yoseph, R. W. Hartel, and D. Howling, Three-dimensional model of phase transition of thin sucrose films during drying, J. Food Eng, vol.44, pp.13-22, 2000.

C. Bernard, B. Broyart, J. Vasseur, and P. Relkin, Production of whey protein powders with controlled end-use properties, 15th International Drying Symposium, 2006.

B. R. Bhandari and T. Howes, Implication of glass transition for the drying and stability of dried foods, J. Food Eng, vol.40, pp.71-79, 1999.

B. R. Bhandari, K. C. Patel, and X. D. Chen, Spray drying of food materials -process and product characteristics, Drying Technologies in Food Processing, pp.113-159, 2008.

J. J. Bimbenet, P. Schuck, M. Roignant, G. Brulé, and S. Méjean, Heat balance of a multistage spray-dryer: principles and example of application, Lait, vol.82, pp.541-551, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00895375

V. S. Birchal, L. Huang, A. S. Mujumdar, and M. L. Passos, Spray dryers: modeling and simulation, Dry. Technol, vol.24, pp.359-371, 2006.

P. Boonyai, B. Bhandari, and T. Howes, Stickiness measurement techniques for food powders: a review, Powder Technol, vol.145, pp.34-46, 2004.

P. Boonyai, B. Bhandari, and T. Howes, Measurement of glass-rubber transition temperature of skim milk powder by static mechanical test, Dry. Technol, vol.23, pp.1499-1514, 2005.

L. J. Bruce and M. R. Okos, Moisture diffusivity in pasta during drying, J. Food Eng, vol.17, pp.117-142, 1992.

X. D. Chen, Heat-mass transfer and structure formation during drying of single food droplets, Dry. Technol, vol.22, pp.179-190, 2004.

X. D. Chen, Moisture diffusivity in food and biological materials, Dry. Technol, vol.25, pp.1203-1213, 2007.

K. Patel,

X. D. Chen and S. X. Lin, Air drying of milk droplet under constant and time-dependent conditions, AIChE J, vol.51, pp.1790-1799, 2005.

X. D. Chen and K. C. Patel, Manufacturing better quality food powders from spray drying and subsequent treatments, Dry. Technol, vol.26, pp.1313-1318, 2008.

X. D. Chen, W. Pirini, and M. Ozilgen, The reaction engineering approach to modelling drying of thin layer of pulped kiwifruit flesh under conditions of small biot numbers, Chem. Eng. Process, vol.40, pp.311-320, 2001.

X. D. Chen and G. Z. Xie, Fingerprints of the drying behaviour of particulate or thin layer food materials established using a reaction engineering model, Food Bioprod. Process, vol.75, pp.213-222, 1997.

C. T. Crowe, M. Sommerfeld, and Y. Tsuji, Fundamentals of Gas-Particle and Gas-Droplet Flows, 1998.

N. Dalmaz, H. O. Ozbelge, A. N. Eraslan, and Y. Uludag, Heat and mass transfer mechanisms in drying of a suspension droplet: a new computational model, Dry. Technol, vol.25, pp.391-400, 2007.

A. A. Dolinsky, High-temperature spray drying, Dry. Technol, vol.19, pp.785-806, 2001.

I. Doymaz, Convective air drying characteristics of thin layer carrots, J. Food Eng, vol.61, pp.359-364, 2004.

G. I. Efremov, Drying kinetics derived from diffusion equation with flux-type boundary conditions, Dry. Technol, vol.20, pp.55-66, 2002.

G. I. Efremov and T. Kudra, Calculation of the effective diffusion coefficients by applying a quasi-stationary equation for drying kinetics, Dry. Technol, vol.22, pp.2273-2279, 2004.

G. Ferrari, G. Meerdink, and P. Walstra, Drying kinetics for a single droplet of skim-milk, J. Food Eng, vol.10, pp.215-230, 1989.

D. F. Fletcher, B. Guo, D. J. Harvie, T. A. Langrish, J. J. Nijdam et al., What is important in the simulation of spray dryer performance and how do current CFD models perform?, Appl. Math. Model, vol.30, pp.1281-1292, 2006.

K. D. Foster, J. E. Bronlund, and A. H. Paterson, Glass transition related cohesion of amorphous sugar powders, J. Food Eng, vol.77, pp.997-1006, 2006.

W. H. Gauvin and S. Katta, Basic concepts of spray dryer design, AIChE J, vol.22, pp.713-724, 1976.

W. H. Gauvin, S. Katta, and F. H. Knelman, Drop trajectory predictions and their importance in the design of spray dryers, Int. J. Multiphas. Flow, vol.1, pp.793-816, 1975.

C. Groenewold, C. Moser, H. Groenewold, and E. Tsotsas, Determination of single-particle drying kinetics in an acoustic levitator, Chem. Eng. J, vol.86, pp.217-222, 2002.

B. Guo, D. F. Fletcher, and T. A. Langrish, Simulation of the agglomeration in a spray using Lagrangian particle tracking, Appl. Math. Model, vol.28, pp.273-290, 2004.

B. Guo, T. A. Langrish, and D. F. Fletcher, Simulation of gas flow instability in a spray dryer, Chem. Eng. Res. Des, vol.81, pp.631-638, 2003.

D. J. Harvie, T. A. Langrish, and D. F. Fletcher, A computational fluid dynamics study of a tall-form spray dryer, Food Bioprod. Process, vol.80, pp.163-175, 2002.

L. Huang, K. Kumar, and A. S. Mujumdar, Use of computational fluid dynamics to evaluate alternative spray dryer chamber configurations, Dry. Technol, vol.21, pp.385-412, 2003.

L. X. Huang, K. Kumar, and A. S. Mujumdar, A comparative study of a spray dryer with rotary disc atomizer and pressure nozzle using computational fluid dynamic simulations, Chem. Eng. Process, vol.45, pp.461-470, 2006.

L. X. Huang and A. S. Mujumdar, Simulation of an industrial spray dryer and prediction of off-design performance, Dry. Technol, vol.25, pp.703-714, 2007.

F. P. Incropera and D. P. Dewitt, Fundamentals of Heat and Mass Transfer, 2002.

R. Jeantet, R. Ducept, A. Dolivet, S. Méjean, and P. Schuck, Residence time distribution: a tool to improve spray-drying control, Dairy Sci. Technol, vol.88, pp.31-43, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00729903

Y. Jin and X. D. Chen, Numerical study of the drying process of different sized particles in an industrial-scale spray dryer, Dry. Technol, vol.27, pp.371-381, 2009.

O. Kastner, G. Brenn, D. Rensink, and C. Tropea, The acoustic tube levitator -a novel device for determining the drying kinetics of single droplets, Chem. Eng. Technol, vol.24, pp.335-339, 2001.

M. E. Katekawa and M. A. Silva, On the influence of glass transition on shrinkage in convective drying of fruits: a case study of banana drying, Dry. Technol, vol.25, pp.1659-1666, 2007.

, Simulation of spray drying -pros & cons 205

A. A. Ketelaars, L. Pel, W. J. Coumans, and P. J. Kerkhof, Drying kinetics: a comparison of diffusion coefficients from moisture concentration profiles and drying curves, Chem. Eng. Sci, vol.50, pp.1187-1191, 1995.

F. G. Kieviet, J. Van-raaij, P. P. De-moor, and P. J. Kerkhof, Measurement and modelling of the air flow pattern in a pilot-plant spray dryer, Chem. Eng. Res. Des, vol.75, pp.321-328, 1997.

P. S. Kuts, C. Strumillo, and I. Zbicinski, Evaporation kinetics of single droplets containing dissolved biomass, Dry. Technol, vol.14, pp.2041-2060, 1996.

T. A. Langrish, Multi-scale mathematical modelling of spray dryers, J. Food Eng, vol.93, pp.218-228, 2009.

T. A. Langrish and T. K. Kockel, The assessment of a characteristic drying curve for milk powder for use in computational fluid dynamics modelling, Chem. Eng. J, vol.84, pp.69-74, 2001.

T. A. Langrish and K. Kota, A comparison of collision kernels for sprays from one and two-nozzle atomisation systems, Chem. Eng. J, vol.126, pp.131-138, 2007.

T. A. Langrish, J. Williams, and D. F. Fletcher, Simulation of the effects of inlet swirl on gas flow patterns in a pilot-scale spray dryer, Chem. Eng. Res. Des, vol.82, pp.821-833, 2004.

J. Leiterer, F. Delißen, F. Emmerling, A. Thünemann, and U. Panne, Structure analysis using acoustically levitated droplets, Anal. Bioanal. Chem, vol.391, pp.1221-1228, 2008.

Z. Li and N. Kobayashi, Determination of moisture diffusivity by thermo-gravimetric analysis under non-isothermal condition, Dry. Technol, vol.23, pp.1331-1342, 2005.

X. Li and I. Zbicinski, A sensitivity study on CFD modeling of cocurrent spray-drying process, Dry. Technol, vol.23, pp.1681-1691, 2005.

S. X. Lin and X. D. Chen, Changes in milk droplet diameter during drying under constant drying conditions investigated using the glass-filament method, Food Bioprod, Process, vol.82, pp.213-218, 2004.

S. X. Lin and X. D. Chen, A model for drying of an aqueous lactose droplet using the reaction engineering approach, Dry. Technol, vol.24, pp.1329-1334, 2006.

S. X. Lin and X. D. Chen, The reaction engineering approach to modelling the cream and whey protein concentrate droplet drying, Chem. Eng. Process, vol.46, pp.437-443, 2007.

S. X. Lin, X. D. Chen, and D. L. Pearce, Desorption isotherm of milk powders at elevated temperatures and over a wide range of relative humidity, J. Food Eng, vol.68, pp.257-264, 2005.

P. S. Madamba, R. H. Driscoll, and K. A. Buckle, The thin-layer drying characteristics of garlic slices, J. Food Eng, vol.29, pp.75-97, 1996.

K. Masters, Spray Drying Handbook, 5th edn, 1991.

G. Meerdink, Drying of Liquid Food Droplets: Enzyme Inactivation and Multicomponent Diffusion, 1993.

G. Meerdink and K. V. Riet, Prediction of product quality during spray drying, Food Bioprod, Process, vol.73, pp.165-170, 1995.

L. C. Menting and B. Hoogstad, Volatiles retention during the drying of aqueous carbohydrate solutions, J. Food Sci, vol.32, pp.87-90, 1967.

M. Mezhericher, A. Levy, and I. Borde, Heat and mass transfer of single droplet/wet particle drying, Chem. Eng. Sci, vol.63, pp.12-23, 2008.

M. Mezhericher, A. Levy, and I. Borde, Modeling of droplet drying in spray chambers using 2d and 3d computational fluid dynamics, Dry. Technol, vol.27, pp.359-370, 2009.

V. V. Mistry and J. B. Pulgar, Physical and storage properties of high milk protein powder, Int. Dairy J, vol.6, pp.195-203, 1996.

A. Negiz, E. S. Lagergren, and A. Cinar, Mathematical models of cocurrent spray drying, Ind. Eng. Chem. Res, vol.34, pp.3289-3302, 1995.

N. D. Nevers, Physical and Chemical Equilibrium for Chemical Engineers, 2002.

D. E. Oakley and R. E. Bahu, Computational modelling of spray dryers, Comp. Chem. Eng, vol.17, pp.493-498, 1993.

L. Ozmen and T. A. Langrish, Comparison of glass transition temperature and sticky point temperature for skim milk powder, Dry. Technol, vol.20, pp.1177-1192, 2002.

M. Parti and B. Paláncz, Mathematical model for spray drying, Chem. Eng. Sci, vol.29, pp.355-362, 1974.

K. C. Patel, Production of uniform particles via single stream drying and new applications of the reaction engineering approach, 2009.

K. Patel,

K. C. Patel and X. D. Chen, Mathematical Modelling for Plug-Flow Spray Dryer, 2004.

K. C. Patel and X. D. Chen, Prediction of spraydried product quality using two simple drying kinetics models, J. Food Process Eng, vol.28, pp.567-594, 2005.

K. C. Patel and X. D. Chen, Sensitivity analysis of the reaction engineering approach to modeling spray drying of whey proteins concentrate, The 5th Asia-Pacific Drying Conference, pp.276-281, 2007.

K. C. Patel and X. D. Chen, Drying of aqueous lactose solutions in a single stream dryer, Food Bioprod. Process, vol.86, pp.185-197, 2008.

K. C. Patel and X. D. Chen, The reaction engineering approach to estimate surface properties of aqueous droplets during convective drying, International Drying Symposium, pp.235-241, 2008.

K. C. Patel and X. D. Chen, Surface-center temperature differences within milk droplets during convective drying and drying-based biot number analysis, AIChE J, vol.54, pp.3273-3290, 2008.

K. C. Patel, X. D. Chen, and S. Kar, The temperature uniformity during air drying of a colloidal liquid droplet, Dry. Technol, vol.23, pp.2337-2367, 2005.

K. C. Patel, X. D. Chen, S. X. Lin, and B. Adhikari, A composite reaction engineering approach to drying of aqueous droplets containing sucrose, maltodextrin (de6) and their mixtures, AIChE J, vol.55, pp.217-231, 2009.

J. Písecký, Handbook of Milk Powder Manufacture, 1997.

G. S. Raghavan, T. N. Tulasidas, S. S. Sablani, and H. S. Ramaswamy, A method of determination of concentration dependent effective moisture diffusivity, Dry. Technol, vol.13, pp.1477-1488, 1995.

C. Ratti, Shrinkage during drying of foodstuffs, J. Food Eng, vol.23, pp.91-105, 1994.

Y. Sano and R. B. Keey, The drying of a spherical particle containing colloidal material into a hollow sphere, Chem. Eng. Sci, vol.37, pp.881-889, 1982.

N. Schadler and W. Kast, A complete model of the drying curve for porous bodies -Experimental and theoretical studies, Int. J. Heat Mass Transf, vol.30, pp.2031-2044, 1987.

H. Schiffter and G. Lee, Single-droplet evaporation kinetics, particle formation in an acoustic levitator. Part 1: Evaporation of water microdroplets assessed using boundary-layer and acoustic levitation theories, J. Pharm. Sci, vol.96, pp.2274-2283, 2007.

H. Schiffter and G. Lee, Single-droplet evaporation kinetics, particle formation in an acoustic levitator. Part 2: Drying kinetics and particle formation from microdroplets of aqueous mannitol, trehalose, or catalase, J. Pharm. Sci, vol.96, pp.2284-2295, 2007.

P. Schuck, A. Dolivet, S. Méjean, P. Zhu, E. Blanchard et al., Drying by desorption: a tool to determine spray drying parameters, J. Food Eng, vol.94, pp.199-204, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01454276

P. Schuck, M. Roignant, G. Brulé, A. Davenel, M. H. Famelart et al., Simulation of water transfer in spray drying, Dry. Technol, vol.16, pp.1371-1393, 1998.
URL : https://hal.archives-ouvertes.fr/hal-02693812

P. Seydel, J. Blomer, and J. Bertling, Modeling particle formation at spray drying using population balances, Dry. Technol, vol.24, pp.137-146, 2006.

A. K. Shrestha, T. Howes, B. P. Adhikari, and B. R. Bhandari, Water sorption and glass transition properties of spray dried lactose hydrolysed skim milk powder, LWT -Food Sci. Technol, vol.40, pp.1593-1600, 2007.

V. A. Shulyak and L. A. Izotova, Shrinkage kinetics during convective drying of selected berries, Dry. Technol, vol.27, pp.495-501, 2009.

J. Sloth, S. Kiil, A. D. Jensen, S. K. Andersen, K. Jørgensen et al., Model based analysis of the drying of a single solution droplet in an ultrasonic levitator, Chem. Eng. Sci, vol.61, pp.2701-2709, 2006.

J. Straatsma, G. Van-houwelingen, A. E. Steenbergen, D. Jong, and P. , Spray drying of food products: 1. Simulation model, J. Food Eng, vol.42, pp.67-72, 1999.

J. Straatsma, G. Van-houwelingen, A. E. Steenbergen, D. Jong, and P. , Spray drying of food products: 2. Prediction of insolubility index, J. Food Eng, vol.42, pp.73-77, 1999.

C. Strumillo and T. Kudra, Drying: Principles, Applications, and Design, 1986.

, Simulation of spray drying -pros & cons, p.207

V. Truong, B. R. Bhandari, and T. Howes, Optimization of co-current spray drying process of sugar-rich foods, Part I. Moisture and glass transition temperature profile during drying, J. Food Eng, vol.71, pp.55-65, 2005.

R. E. Verdurmen, P. Menn, J. Ritzert, S. Blei, G. C. Nhumaio et al., Dry. Technol, vol.22, pp.1403-1461, 2004.

P. E. Viollaz and C. O. Rovedo, A drying model for three-dimensional shrinking bodies, J. Food Eng, vol.52, pp.149-153, 2002.

D. E. Walton, The evaporation of water droplets. A single droplet drying experiment, Dry. Technol, vol.22, pp.431-456, 2004.

M. W. Woo, W. R. Daud, A. S. Mujumdar, M. Z. Talib, W. Z. Hua et al., Comparative study of droplet drying models for CFD modelling, Chem. Eng. Res. Des, vol.86, pp.1038-1048, 2008.

M. W. Woo, W. R. Daud, A. S. Mujumdar, Z. Wu, M. Z. Talib et al., Nonswirling steady and transient flow simulations in short-form spray dryers, Chem. Prod. Process Model, vol.4, pp.1-32, 2009.

M. W. Woo, W. R. Daud, S. M. Tasirin, and M. Z. Talib, Effect of wall surface properties at different drying kinetics on the deposition problem in spray drying, Dry. Technol, vol.26, pp.15-26, 2008.

E. Wulsten and G. Lee, Surface temperature of acoustically levitated water microdroplets measured using infra-red thermography, Chem. Eng. Sci, vol.63, pp.5420-5424, 2008.

A. Yadollahinia and M. Jahangiri, Shrinkage of potato slice during drying, J. Food Eng, vol.94, pp.52-58, 2009.

A. L. Yarin, G. Brenn, O. Kastner, D. Rensink, and C. Tropea, Evaporation of acoustically levitated droplets, J. Fluid Mech, vol.399, pp.151-204, 1999.

A. L. Yarin, G. Brenn, O. Kastner, and C. Tropea, Drying of acoustically levitated droplets of liquid-solid suspensions: evaporation and crust formation, Phys. Fluid, vol.14, pp.2289-2298, 2002.

A. L. Yarin, G. Brenn, and D. Rensink, Evaporation of acoustically levitated droplets of binary liquid mixtures, Int. J. Heat Fluid Flow, vol.23, pp.471-486, 2002.

A. L. Yarin, M. Pfaffenlehner, and C. Tropea, On the acoustic levitation of droplets, J. Fluid Mech, vol.356, pp.65-91, 1998.

I. Zbicinski, Development and experimental verification of momentum, heat and mass transfer model in spray drying, Chem. Eng. J, vol.58, pp.123-133, 1995.

I. Zbicinski, S. Grabowski, C. Strumillo, L. Kiraly, and W. Krzanowski, Mathematical modelling of spray drying, Comp. Chem. Eng, vol.12, pp.209-214, 1988.

I. Zbicinski and X. Li, Conditions for accurate CFD modeling of spray-drying process, Dry. Technol, vol.24, pp.1109-1114, 2006.

I. Zbicinski, C. Strumillo, and A. Delag, Drying kinetics and particle residence time in spray drying, Dry. Technol, vol.20, pp.1751-1768, 2002.

N. P. Zogzas and Z. B. Maroulis, Effective moisture diffusivity estimation from drying data. A comparison between various methods of analysis, Dry. Technol, vol.14, pp.1543-1573, 1996.