M. Etcheverry and S. E. Barbosa, Glass Fiber Reinforced Polypropylene Mechanical Properties Enhancement by Adhesion Improvement, Materials, vol.41, issue.12, p.1084, 2012.
DOI : 10.1515/POLYENG.1992.11.1-2.71
URL : http://doi.org/10.3390/ma5061084

A. Bernasconi, P. Davoli, D. Rossin, and C. Armanni, Effect of reprocessing on the fatigue strength of a fibreglass reinforced polyamide, Composites Part A: Applied Science and Manufacturing, vol.38, issue.3, p.710, 2007.
DOI : 10.1016/j.compositesa.2006.09.012

P. Eriksson, A. Albertsson, P. Boydell, K. Eriksson, and J. E. Manson, Reprocessing of fiberglass reinforced polyamide 66: Influence on short term properties, Polymer Composites, vol.61, issue.6, p.823, 1996.
DOI : 10.1002/pc.10675

T. Corbière-nicollier, B. Gfeller-laban, L. Lundquist, Y. Leterrier, J. E. Månson et al., Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics, Resources, Conservation and Recycling, vol.33, issue.4, p.267, 2001.
DOI : 10.1016/S0921-3449(01)00089-1

S. V. Joshi, L. T. Drzal, A. K. Mohanty, and S. Arora, Are natural fiber composites environmentally superior to glass fiber reinforced composites?, Composites Part A: Applied Science and Manufacturing, vol.35, issue.3, p.371, 2004.
DOI : 10.1016/j.compositesa.2003.09.016

U. Riedel, Biocomposites, Polym. Sci. A Compr. Ref. Polym. a Sustain. Environ. Green Energy, vol.10, pp.295-315, 2012.
DOI : 10.1016/B978-0-444-53349-4.00268-5

Y. S. Song, J. R. Youn, and T. G. Gutowski, Life cycle energy analysis of fiber-reinforced composites, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, p.1257, 2009.
DOI : 10.1016/j.compositesa.2009.05.020

G. Koronis, A. Silva, and M. , Green composites: A review of adequate materials for automotive applications, Composites Part B: Engineering, vol.44, issue.1, p.120, 2013.
DOI : 10.1016/j.compositesb.2012.07.004

A. Ashori, Wood???plastic composites as promising green-composites for automotive industries!, Bioresource Technology, vol.99, issue.11, p.4661, 2008.
DOI : 10.1016/j.biortech.2007.09.043

J. Markarian, Outdoor living space drives growth in wood-plastic composites, Plastics, Additives and Compounding, vol.10, issue.4, p.20, 2008.
DOI : 10.1016/S1464-391X(08)70131-4

P. A. Fowler, J. M. Hughes, and R. M. Elias, Biocomposites: technology, environmental credentials and market forces, Journal of the Science of Food and Agriculture, vol.92, issue.12, p.1781, 2006.
DOI : 10.1002/jsfa.2558

O. Faruk, A. K. Bledzki, H. Fink, and M. Sain, Biocomposites reinforced with natural fibers: 2000???2010, Biocomposites Reinforced with Natural Fibers, p.1552, 2000.
DOI : 10.1016/j.progpolymsci.2012.04.003

J. Summerscales, N. Dissanayake, A. Virk, and W. Hall, A review of bast fibres and their composites. Part 2 ??? Composites, Composites Part A: Applied Science and Manufacturing, vol.41, issue.10, p.1336, 2010.
DOI : 10.1016/j.compositesa.2010.05.020

H. Ku, H. Wang, N. Pattarachaiyakoop, and M. Trada, A review on the tensile properties of natural fiber reinforced polymer composites, Composites Part B: Engineering, vol.42, issue.4, p.856, 2011.
DOI : 10.1016/j.compositesb.2011.01.010

R. M. Da-costa, S. J. Lee, G. G. Allison, S. P. Hazen, A. Winters et al., Genotype, development and tissue-derived variation of cell-wall properties in the lignocellulosic energy crop Miscanthus, Annals of Botany, vol.114, issue.6, p.1265, 2014.
DOI : 10.1093/aob/mcu054

K. Charlet, C. Baley, C. Morvan, J. P. Jernot, M. Gomina et al., Characteristics of Herm??s flax fibres as a function of their location in the stem and properties of the derived unidirectional composites, Composites Part A: Applied Science and Manufacturing, vol.38, issue.8, p.1912, 2007.
DOI : 10.1016/j.compositesa.2007.03.006

E. M. Hodgson, S. J. Lister, A. V. Bridgwater, J. Clifton-brown, and I. S. Donnison, Genotypic and environmentally derived variation in the cell wall composition of Miscanthus in relation to its use as a biomass feedstock, Biomass and Bioenergy, vol.34, issue.5, p.652, 2010.
DOI : 10.1016/j.biombioe.2010.01.008

K. Kaack and K. Schwarz, Morphological and mechanical properties of Miscanthus in relation to harvesting, lodging, and growth conditions, Industrial Crops and Products, vol.14, issue.2, p.145, 2001.
DOI : 10.1016/S0926-6690(01)00078-4

T. Le-ngoc-huyen, C. Rémond, R. M. Dheilly, and B. Chabbert, Effect of harvesting date on the composition and saccharification of Miscanthus x giganteus, Bioresource Technology, vol.101, issue.21, p.8224, 2010.
DOI : 10.1016/j.biortech.2010.05.087

S. Belkhir, A. Koubaa, A. Khadhri, M. Ksontini, H. Nadji et al., Seasonal effect on the chemical composition of the leaves of Stipa tenacissima L. and implications for pulp properties, Industrial Crops and Products, vol.44, p.56, 2013.
DOI : 10.1016/j.indcrop.2012.09.023

K. M. Rao and K. M. Rao, Extraction and tensile properties of natural fibers: Vakka, date and bamboo, Composite Structures, vol.77, issue.3, p.288, 2007.
DOI : 10.1016/j.compstruct.2005.07.023

D. Liu, J. Song, D. P. Anderson, P. R. Chang, and Y. Hua, Bamboo fiber and its reinforced composites: structure and properties, Cellulose, vol.101, issue.suppl, p.1449, 2012.
DOI : 10.1007/s10570-012-9741-1

S. Hanana, A. Elloumi, V. Placet, H. Tounsi, H. Belghith et al., An efficient enzymatic-based process for the extraction of high-mechanical properties alfa fibres, Industrial Crops and Products, vol.70, p.190, 2015.
DOI : 10.1016/j.indcrop.2015.03.018

J. Summerscales, N. P. Dissanayake, A. S. Virk, and W. Hall, A review of bast fibres and their composites. Part 1 ??? Fibres as reinforcements, Composites Part A: Applied Science and Manufacturing, vol.41, issue.10, p.1329, 2010.
DOI : 10.1016/j.compositesa.2010.06.001

F. P. La-mantia and M. Morreale, Green composites: A brief review, Composites Part A: Applied Science and Manufacturing, vol.42, issue.6, p.579, 2001.
DOI : 10.1016/j.compositesa.2011.01.017

M. C. Mccrary-dennis and O. I. Okoli, A review of multiscale composite manufacturing and challenges, Journal of Reinforced Plastics and Composites, vol.31, issue.24, p.1687, 2012.
DOI : 10.1177/0731684412456612

A. M. El-sabbagh, L. Steuernagel, D. Meiners, and G. Ziegmann, Effect of extruder elements on fiber dimensions and mechanical properties of bast natural fiber polypropylene composites, Journal of Applied Polymer Science, vol.308, issue.12, p.40435, 2014.
DOI : 10.1002/app.40435

G. Gamon, P. Evon, and L. , Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based biocomposites, Industrial Crops and Products, vol.46, p.173, 2013.
DOI : 10.1016/j.indcrop.2013.01.026
URL : https://hal.archives-ouvertes.fr/hal-00790824

H. D. Rozman, A. Sobra-mulisa, and G. S. Tay, A comparison study of lignocellulosic-thermoplastic composites prepared from different compounding techniques, Journal of Applied Polymer Science, vol.39, issue.6, p.4547, 2012.
DOI : 10.1002/app.35488

A. Lefeuvre, A. Bourmaud, C. Morvan, and C. Baley, Elementary flax fibre tensile properties: Correlation between stress???strain behaviour and fibre composition, Industrial Crops and Products, vol.52, p.762, 2014.
DOI : 10.1016/j.indcrop.2013.11.043
URL : https://hal.archives-ouvertes.fr/hal-00988036

V. Placet, F. Trivaudey, O. Cisse, V. Gucheret-retel, and M. L. Boubakar, Diameter dependence of the apparent tensile modulus of hemp fibres: A morphological, structural or ultrastructural effect?, Composites Part A: Applied Science and Manufacturing, vol.43, issue.2, p.275, 2012.
DOI : 10.1016/j.compositesa.2011.10.019

K. Oksman, A. P. Mathew, R. Långström, B. Nyström, and K. Joseph, The influence of fibre microstructure on fibre breakage and mechanical properties of natural fibre reinforced polypropylene, Composites Science and Technology, vol.69, issue.11-12, pp.11-121847, 2009.
DOI : 10.1016/j.compscitech.2009.03.020

R. Ramli, R. M. Yunus, and M. D. Beg, Effects of fiber loading, fiber type, its mesh sizes, and coupling agent on the properties of oil palm biomass/polypropylene composites, Journal of Composite Materials, vol.77, issue.2, p.2165, 2011.
DOI : 10.1177/0021998311401069

C. V. Beale and S. P. Long, Seasonal dynamics of nutrient accumulation and partitioning in the perennial C4-grasses Miscanthus ?? giganteus and Spartina cynosuroides, Biomass and Bioenergy, vol.12, issue.6, p.419, 1997.
DOI : 10.1016/S0961-9534(97)00016-0

L. Strullu, S. Cadoux, M. Preudhomme, M. H. Jeuffroy, and N. Beaudoin, Biomass production and nitrogen accumulation and remobilisation by Miscanthus??giganteus as influenced by nitrogen stocks in belowground organs, Field Crops Research, vol.121, issue.3, p.381, 2011.
DOI : 10.1016/j.fcr.2011.01.005
URL : https://hal.archives-ouvertes.fr/hal-01019313

H. W. Zub and M. Brancourt, , a major energy crop. A review, Agronomy for Sustainable Development, vol.51, issue.2, p.201, 2010.
DOI : 10.1051/agro/2009034

J. Harvey, A versatile solution? Growing Miscanthus for bioenergy, RenewableEnergyWorld.com, vol.10, issue.1, 2007.