R. F. Pellerin and R. J. Ross, Nondestructive Evaluation of Wood, 2002.

. Ansi/asnt-cp-189, ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel

P. J. Van-mantgem and N. L. Stephenson, Does coring contribute to tree mortality?, Can. J. For. Res, vol.34, pp.2394-2398, 2004.

E. W. Tsen, T. Sitzia, and B. L. Webber, To core, or not to core: The impact of coring on tree health and a best-practice framework for collecting dendrochronological information from living trees, Biol. Rev, vol.91, pp.899-924, 2016.

G. Downes, I. Hudson, C. Raymond, G. Dean, A. Michell et al., Sampling Plantation Eucalypts for Wood and Fibre Properties, 1997.

C. Raymond, Density assessment of radiata pine: Sampling strategy revisited, Holzforschung, vol.60, pp.580-582, 2006.

L. Jordan, L. R. Schimleck, A. Clark, D. B. Hall, and R. F. Daniels, Estimating optimum sampling size to determine weighted core specific gravity of planted loblolly pine, Can. J. For. Res, vol.37, pp.2242-2249, 2007.

C. R. Mora, H. L. Allen, R. F. Daniels, and A. Clark, Modeling corewood-outerwood transition in loblolly pine using wood specific gravity, Can. J. For. Res, vol.37, pp.999-1011, 2007.

J. R. Moore, D. J. Cown, and R. B. Mckinley, Modelling microfibril angle variation in New Zealand-grown radiata pine, N. Z. J. For. Sci, vol.44, 2014.

D. Auty, B. A. Gardiner, A. Achim, J. R. Moore, and A. D. Cameron, Models for predicting microfibril angle variation in Scots pine, Ann. For. Sci, vol.70, pp.209-218, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01201467

L. A. Apiolaza, B. Butterfield, S. S. Chauhan, and J. C. Walker, Characterization of mechanically perturbed young stems: Can it be used for wood quality screening?, Ann. For. Sci, vol.68, pp.407-414, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00930763

S. S. Chauhan and J. F. Walker, Wood quality in artificially inclined 1-year-old trees of Eucalyptus regnans-Differences in tension wood and opposite wood properties, Can. J. For. Res, vol.41, pp.930-937, 2011.

S. S. Chauhan, M. Sharma, J. Thomas, L. A. Apioloaza, D. A. Collings et al., Methods for the very early selection of Pinus radiata D. Don for solid wood products, Ann. For. Sci, vol.70, pp.439-449, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01201483

M. Sharma, L. A. Apioloaza, S. Chauhan, J. P. Mclean, and J. Wikaira, Ranking very young Pinus radiata families for acoustic stiffness and validation by microfibril angle, Ann. For. Sci, vol.73, pp.393-400, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01532318

V. Bucur, C. Herbé, and G. Nosei, Annual Ring Characteristics of Pinus Taeda Measured by Ultrasonic and X-Ray Techniques, IAWA J, vol.15, pp.121-132, 1994.

M. B. Applequist, A simple pith location for use with off-centre increment cores, J. For, vol.56, p.141, 1958.

C. Liu, J. Rectifying radii on off-center increment cores. For. Sci, vol.32, pp.1058-1061, 1986.

D. Dujesiefken, A. Rhaesa, D. Eckstein, and H. Stobbe, Tree wound reactions of differently treated boreholes, J. Arboric, vol.25, pp.113-123, 1999.

T. L. Eberhardt and L. J. Samuelson, Collection of wood quality data by X-ray densitometry: A case study with three southern pines, Wood Sci. Technol, vol.49, pp.739-753, 2015.

G. Downes, M. Grabner, R. Wimmer, N. Gierlinger, and R. Evans, Heartwood extractives in larch and effects on X-ray densitometry, Can. J. For. Res, vol.35, pp.2781-2786, 2005.

T. L. White, A conceptual framework for tree improvement programs. New For, vol.1, pp.325-342, 1987.

B. J. Zobel and J. Talbert, Applied Forest Tree Improvement

J. Cornelius, Heritabilities and additive genetic coefficients of variation in forest trees, Can. J. For. Res, vol.24, pp.372-379, 1994.

G. Emms, B. Nanayakkara, and J. Harrington, A novel technique for non-damaging measurement of sound speed in seedlings, Eur. J. For. Res, vol.131, pp.1449-1459, 2012.

G. W. Emms, J. J. Harrington, and B. Nanayakkara, Application of longitudinal-wave time-of-flight sound speed measurement to Pinus radiata seedlings, Can. J. For. Res, vol.43, pp.750-756, 2013.

R. Gonçalves, R. G. Lorensani, M. Ruy, N. S. Veiga, G. Müller et al., Evolution of acoustical, geometrical, physical, and mechanical parameters from seedling to cutting age in Eucalyptus clones used in the pulp and paper industries in Brazil, vol.69, pp.5-16, 2019.

L. A. Apiolaza, Very early selection for solid wood quality: Screening for early winners, Ann. For. Sci, vol.66, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00883518

D. Grattapaglia and M. D. Resende, Genomic selection in forest tree breeding, Tree Genet. Genomes, vol.7, pp.241-255, 2011.

F. Isik, Genomic selection in forest tree breeding: The concept and an outlook to the future. New For, vol.45, pp.379-401, 2014.

R. A. Mrode, Linear Models for the Prediction of Animal Breeding Values, 1996.

D. J. Garrick, J. F. Taylor, and R. L. Fernando, Deregressing estimated breeding values and weighting information for genomic regression analyses, Genet. Sel. Evol, vol.41, 2009.

T. H. Meuwissen, B. J. Hayes, and M. E. Goddard, Prediction of total genetic value using genome-wide dense marker maps, Genetics, vol.157, pp.1819-1829, 2001.

B. Hayes, P. Bowman, A. Chamberlain, M. Goddard, and M. Goddard, Invited review: Genomic selection in dairy cattle: Progress and challenges, J. Dairy Sci, vol.92, pp.433-443, 2009.

M. D. Resende, M. F. Resende, C. P. Sansaloni, C. D. Petroli, A. A. Missiaggia et al., Genomic selection for growth and wood quality in Eucalyptus: Capturing the missing heritability and accelerating breeding for complex traits in forest trees, New Phytol, vol.194, pp.116-128, 2012.

E. P. Cappa, Y. A. El-kassaby, M. N. Garcia, C. Acuña, N. M. Borralho et al., Impacts of Population Structure and Analytical Models in Genome-Wide Association Studies of Complex Traits in Forest Trees: A Case Study in Eucalyptus globulus, PLoS ONE, vol.8, 2013.

J. Beaulieu, T. Doerksen, S. Clément, J. Mackay, and J. Bousquet, Accuracy of genomic selection models in a large population of open-pollinated families in white spruce, vol.113, pp.343-352, 2014.

X. Wang, P. Carter, R. J. Ross, and B. K. Brashaw, Acoustic assessment of wood quality of raw forest materials-A path to increased profitability. For, Prod. J, vol.57, pp.6-14, 2007.

R. J. Ross, Nondestructive Evaluation of Wood, USDA-FS Forest Products Laboratory, 2015.

P. Carter, Acoustic technology-Enhanced tools for research and operations, Proceedings of the 20th International Nondestructive Testing and Evaluation of Wood Symposium, pp.12-15, 2017.

A. C. Matheson, W. J. Gapare, J. Ilic, and H. X. Wu, Inheritance and Genetic Gain in Wood Stiffness in Radiata Pine Assessed Acoustically in Young Standing Trees, Silvae Genet, vol.57, pp.56-64, 2008.

H. Lindström, M. Reale, and M. Grekin, Using non-destructive testing to assess modulus of elasticity of Pinus sylvestris trees, Scand. J. For. Res, vol.24, pp.247-257, 2009.

P. Lenz, D. Auty, A. Achim, J. Beaulieu, and J. Mackay, Genetic improvement of white spruce mechanical woodtraits-early screening by means of acoustic velocity, vol.4, pp.575-594, 2013.

Z. Hong, A. Fries, S. Lundqvist, B. A. Gull, and H. X. Wu, Measuring stiffness using acoustic tool for Scots pine breeding selection, Scand. J. For. Res, vol.30, pp.1-10, 2015.

D. Auty and A. Achim, The relationship between standing tree acoustic assessment and timber quality in Scots pine and the practical implications for assessing timber quality from naturally regenerated stands, Forestry, vol.81, pp.475-487, 2008.

M. Andrews, Wood quality measurement-Son et lumie're, N. Z. J. For, vol.47, pp.19-21, 2002.

C. R. Mora, L. R. Schimleck, F. Isik, J. M. Mahon, A. Clark et al., Relationship between acoustic variables and different measures of stiffness in standing Pinus taeda trees, Can. J. For. Res, vol.39, pp.1421-1429, 2009.

K. Ikeda and T. Arima, Quality evaluation of standing trees by a stress-wave propagation method and its application II. Evaluation of sugi stands and application to production of sugi structural square sawn timber, Mokuzai Gakaishi, vol.46, pp.189-196, 2000.

S. Chauhan, J. Walker, and S. Chauhan, Variations in acoustic velocity and density with age, and their interrelationships in radiata pine, For. Ecol. Manag, vol.229, pp.388-394, 2006.

M. Grabianowski, B. Manley, and J. C. Walker, Acoustic measurements on standing trees, logs and green lumber, Wood Sci. Technol, vol.40, p.50, 2006.

K. Simic, V. Gendvilas, C. O'reilly, and A. M. Harte, Predicting structural timber grade-determining properties using acoustic and density measurements on young Sitka spruce trees and logs, Holzforschung, vol.73, pp.139-149, 2019.

J. Lasserre, E. G. Mason, M. S. Watt, and J. R. Moore, Influence of initial planting spacing and genotype on microfibril angle, wood density, fibre properties and modulus of elasticity in Pinus radiata D. Don corewood, For. Ecol. Manag, vol.258, 1924.

X. Wang, Acoustic measurements on trees and logs: A review and analysis, Wood Sci. Technol, vol.47, pp.965-975, 2013.

M. A. Butler, J. Dahlen, T. L. Eberhardt, C. Montes, F. Antony et al., Acoustic evaluation of loblolly pine tree-and lumber-length logs allows for segregation of lumber modulus of elasticity, not for modulus of rupture, Ann. For. Sci, vol.74, pp.1-15, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01710369

S. Wang and S. Chuang, Experimental Data Correction of the Dynamic Elastic Moduli, Velocity and Density of Solid Wood as a Function of Moisture Content above the Fiber Saturation Point, Holzforschung, vol.54, pp.309-314, 2000.

J. M. Chan, J. C. Walker, and C. A. Raymond, Effects of moisture content and temperature on acoustic velocity and dynamic MOE of radiata pine sapwood boards, Wood Sci. Technol, vol.45, pp.609-626, 2011.

X. Wang, R. J. Ross, M. Mcclellan, R. J. Barbour, J. R. Erickson et al., Nondestructive evaluation of standing trees with a stress wave method, Wood Fiber Sci, vol.33, pp.522-533, 2001.

C. L. Huang, Predicting lumber stiffness of standing trees, Proceedings of the 12th International Nondestructive Testing and Evaluation of Wood Symposium, pp.13-15, 2000.

J. R. Moore, A. J. Lyon, G. J. Searles, S. A. Lehneke, and D. J. Ridley-ellis, Within-and between-stand variation in selected properties of Sitka spruce sawn timber in the UK: Implications for segregation and grade recovery, Ann. For. Sci, vol.70, pp.403-415, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01201488

N. Paradis, D. Auty, P. Carter, and A. Achim, Using a Standing-Tree Acoustic Tool to Identify Forest Stands for the Production of Mechanically-Graded Lumber, Sensors, vol.13, pp.3394-3408, 2013.

E. C. Lowell, C. L. Todoroki, D. P. Dykstra, and D. G. Briggs, Linking acoustic velocity of standing Douglas-fir trees to veneer stiffness: A tree-log-product study across thinning treatments, N. Z. J. For. Sci, vol.44, 2014.

G. M. Downes, N. Ebdon, R. Meder, K. Joyce, and J. French, Standing Tree Measurement of Acoustic Velocity as a Predictor of Kraft Pulp Yield in E. nitens across 2 Sites. FWPA PN07.3025, p.10, 2008.

P. F. Newton, Acoustic-Based Non-Destructive Estimation of Wood Quality Attributes within Standing Red Pine Trees, vol.8, p.380, 2017.

X. Wang, R. J. Ross, M. Mcclellan, R. J. Barbour, J. R. Erickson et al., Strength and Stiffness Assessment of Standing Trees Using a Nondestructive Stress Wave Technique, US Forest Service, 2000.

X. Wang, R. J. Ross, S. Verrill, E. Lowell, and J. Barbour, Acoustic evaluation of thinning and biosolid fertilization effects on wood quality of a Douglas-fir stand, Proceedings of the 19th International Nondestructive Testing and Evaluation of Wood Symposium, pp.22-25, 2015.

D. G. Briggs, G. Thienel, E. C. Turnblom, E. Lowell, D. Dykstra et al., Influence of thinning on acoustic velocity of Douglas-fir trees in western Washington and western Oregon, Proceedings of the 15th International Symposium on Nondestructive Testing of Wood, pp.10-12, 2007.

C. A. Raymond, B. Joe, D. W. Anderson, and D. J. Watt, Effect of thinning on relationships between three measures of wood stiffness in Pinus radiata: Standing trees vs. logs vs. short clear specimens, Can. J. For. Res, vol.38, pp.2870-2879, 2008.

C. Essien, Q. Cheng, B. K. Via, E. F. Loewenstein, and X. Wang, An Acoustics Operations Study for Loblolly Pine (Pinus taeda) Standing Saw Timber with Different Thinning History, Bioresources, vol.11, 2016.

G. Murphy and D. Cown, Stand, stem and log segregation based on wood properties: A review, Scand. J. For. Res, vol.30, pp.1-14, 2015.

D. J. Cown, Comparison of the Pilodyn and Torsiometer methods for the rapid assessment of wood density in living trees, N. Z. J. For. Sci, vol.8, p.50, 1978.

S. Gao, X. Wang, M. C. Wiemann, B. K. Brashaw, and R. J. Ross, A critical analysis of methods for rapid and nondestructive determination of wood density in standing trees, Ann. For. Sci, vol.74, 2017.

J. R. Sprague, J. T. Talbert, J. B. Jett, and R. L. Bryant, Utility of the Pilodyn in selection for mature wood specific gravity in loblolly pine, For. Sci, vol.29, pp.696-701, 1983.

G. Gough and R. D. Barnes, A Comparison of Three Methods of Wood Density Assessment in a, Pinus elliottii Progeny Test. South Afr. For. J, vol.128, pp.22-25, 1984.

J. N. King, F. C. Yeh, J. C. Heaman, and B. P. Dancik, Selection of wood density and diameter in controlled crosses of coastal Douglas-fir, Silvae Genet, vol.37, pp.152-157, 1988.

S. C. Da-rosado, A. Brune, and L. M. De-oliveira, Avaliacão da densidade básica da madeira de árvores em pé, Rev. Arvore, vol.7, pp.147-153, 1983.

V. P. Moura, R. D. Barnes, and J. S. Birks, A comparison of three methods of assessing wood density in provenances of Eucalyptus camaldulensis Dehnh. and other Eucalyptus species in Brazil, Aust. For. Res, vol.17, pp.83-90, 1987.

B. Greaves, N. Borralho, C. Raymond, and A. Farrington, Use of a Pilodyn for the indirect selection of basic density in Eucalyptus nitens, Can. J. For. Res, vol.26, pp.1643-1650, 1996.

S. Wu, J. Xu, G. Li, V. Risto, Z. Lu et al., Use of the pilodyn for assessing wood properties in standing trees of Eucalyptus clones, J. For. Res, vol.21, pp.68-72, 2010.

Z. Chen, B. Karlsson, S. Lundqvist, M. R. Gil, L. Olsson et al., Estimating solid wood properties using Pilodyn and acoustic velocity on standing trees of Norway spruce, Ann. For. Sci, vol.72, pp.499-508, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01284196

C. A. Raymond, A. Muneri, and A. C. Macdonald, Non-destructive sampling for basic density in Eucalyptus globulus and E. nitens, Appita J, vol.51, pp.224-228, 1998.

D. F. Llana, E. Hermoso, I. Bobadilla, and G. Íñiguez-gonzález, Influence of moisture content on the results of penetration and withdrawal resistance measurements on softwoods, vol.72, pp.549-555, 2018.

F. Rinn, F. Schweingruber, and E. Schär, Resistograph and X-ray Density Charts of Wood. Comparative Evaluation of Drill Resistance Profiles and X-ray Density Charts of Different Wood Species, Holzforschung, vol.50, pp.303-311, 1996.

L. R. Costello and S. L. Quarles, Detection of wood decay in blue gum and elm: An evaluation of the Resistograph®and the portable drill, J. Arboric, vol.25, pp.311-318, 1999.

B. Li and F. Isik, Rapid assessment of wood density of live trees using the Resistograph for selection in tree improvement programs, Can. J. For. Res, vol.33, pp.2426-2435, 2003.

J. T. Eckard, F. Isik, B. Bullock, B. Li, and M. Gumpertz, Selection efficiency for solid wood traits in Pinus taeda using time-of-flight acoustic and micro-drill resistance methods, For. Sci, vol.56, pp.233-241, 2010.

I. Fundova, T. Funda, and H. X. Wu, Non-destructive wood density assessment of Scots pine (Pinus sylvestris L.) using Resistograph and Pilodyn, PLoS ONE, vol.13, 2018.

I. Fundova, T. Funda, and H. X. Wu, Non-Destructive Assessment of Wood Stiffness in Scots Pine (Pinus sylvestris L.) and its Use in Forest Tree Improvement, vol.10, p.491, 2019.

G. M. Downes, M. Lausberg, B. M. Potts, D. L. Pilbeam, M. Bird et al., Application of the IML Resistograph to the infield assessment of basic density in plantation eucalypts, Aust. For, vol.81, pp.1-9, 2018.

G. M. Downes and M. Lausberg, Evaluation of the RESI software tool for the prediction of HM200 within pine logs sourced from multiple sites across New Zealand and Australia, p.15, 2016.

A. M. Kloppenburg, Density Determination of Tropical Hardwoods with the Resistograph, 2018.

L. Nutto and T. Biechele, Drilling resistance measurement and the effect of shaft friction-using feed force information for improving decay identification on hard tropical wood, Proceedings of the 19th International Nondestructive Testing and Evaluation of Wood Symposium, pp.22-25, 2015.

E. Sharapov, X. Wang, E. Smirnova, and J. P. Wacker, Wear behavior of drill bits in wood drilling resistance measurements, Wood Fiber Sci, vol.50, pp.154-166, 2018.

D. Walach, J. Jaskowska-lemanska, and P. Dybel, The impact of moisture content of wood on the results of non-destructive tests, Ann. Warsaw Univ. Life Sci. SGGW For. Wood Technol, vol.92, p.50, 2015.

E. Sharapov, C. Brischke, H. Militz, and E. Smirnova, Combined effect of wood moisture content, drill bit rotational speed and feed rate on drilling resistance measurements in Norway spruce, L.) Karst.). Wood Mater. Sci. Eng, pp.1-7, 2018.

I. Carrillo, S. Valenzuela, and J. P. Elissetche, Comparative evaluation of Eucalyptus globulus and E. nitens wood and fibre quality, IAWA J, vol.38, pp.105-116, 2017.

D. M. Drew and G. Downes, A model of stem growth and wood formation in Pinus radiata, Trees, vol.29, pp.1395-1413, 2015.

J. Launay, P. Rozenberg, L. Paques, and J. Dewitte, A new experimental device for rapid measurement of the trunk equivalent modulus of elasticity on standing trees, Ann. For. Sci, vol.57, pp.351-359, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00883318

A. Koizumi and K. Ueda, Estimation of the mechanical properties of standing trees by non-destructive bending tests, Mokuzai Gakkashi, vol.39, pp.669-676, 1986.

A. Koizumi, K. Takada, K. Ueda, and T. Katayose, Radial growth and wood quality of plus trees of Japanese larch. I. Radial growth, density, trunk modulus of elasticity of grafted clones, Mokuzai Gakkaishi, vol.36, pp.98-102, 1990.

A. Vafai and M. Farshad, Modulus of elasticity of wood in standing tree, Wood Sci, vol.12, pp.93-97, 1979.

P. Langbour and . Rigidité-de-l'arbre-sur-pied, Application Aux Peupliers, INPL, 1989.

R. Milne and P. Blackburn, The elasticity and vertical distribution of stress within stems of Picea sitchensis, Tree Physiol, vol.5, pp.195-205, 1989.

J. Launay, M. Ivkovich, C. Bastien, P. Higelin, P. Rozenberg et al., Rapid measurement of trunk MOE on standing trees using RIGIDIMETER, Ann. For. Sci, vol.59, pp.465-469, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00021139

L. E. Pâques and P. Rozenberg, Ranking larch genotypes with the Rigidimeter: Relationships between modulus of elasticity of standing trees and of sawn timber, Ann. For. Sci, vol.66, 2009.

K. Takada, A. Koizumi, and K. Ueda, Geographic variation in the moduli of elasticity of tree trunks among Japanese larch in provenance trial-stands, Mokuzai Gakkaishi, vol.38, pp.222-227, 1992.

K. Takata and Y. Teraoka, Genotypic effects on the variation of wood quality and growth traits in plantation forest made by cutting cultivars of Japanese cedar, J. Wood Sci, vol.48, pp.106-113, 2002.

L. E. Pâques, Roles of European and Japanese larch in the genetic control of growth, architecture and wood quality traits in interspecific hybrids (Larix eurolepis Henry), Ann. For. Sci, vol.61, pp.25-33, 2004.

L. E. Pâques, F. Millier, and P. Rozenberg, Selection perspectives for genetic improvement of wood stiffness in hybrid larch (Larix x eurolepis Henry), Tree Genet. Genomes, vol.6, pp.83-92, 2010.

P. Rozenberg, A. Franc, C. Mamdy, J. Launay, N. Schermann et al., Genetic control of stiffness of standing Douglas fir; from the standing stem to the standardised wood sample, relationships between modulus of elasticity and wood density parameters. Part II, Annales des Sciences Forestières, vol.56, pp.145-154, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00883259

J. Sandak, A. Sandak, and R. Meder, Assessing Trees, Wood and Derived Products with near Infrared Spectroscopy: Hints and Tips, J. Near Infrared Spectrosc, vol.24, pp.485-505, 2016.

I. Ben-gera and K. H. Norris, Determination of moisture content in soybeans by direct spectrophotometry, Israel J. Agric. Res, vol.18, pp.125-132, 1968.

M. D. Birkett and M. J. Gambino, Potential applications for near infrared spectroscopy in the pulping industry, Pap. S. Afr, pp.34-38, 1988.

M. D. Birkett and M. J. Gambino, Estimation of pulp kappa number with near-infrared spectroscopy, Tappi J, vol.72, pp.193-197, 1989.

S. Tsuchikawa and H. Kobori, A review of recent application of near infrared spectroscopy to wood science and technology, J. Wood Sci, vol.61, pp.213-220, 2015.

L. R. Schimleck, G. D. Rezende, B. J. Demuner, and G. M. Downes, Estimation of whole-tree wood quality traits using near infrared spectra from increment cores, Appita J, vol.59, p.231, 2006.

L. R. Schimleck, P. D. Kube, C. Raymond, A. J. Michell, and J. French, Estimation of whole-tree kraft pulp yield of Eucalyptus nitens using near-infrared spectra collected from increment cores, Can. J. For. Res, vol.35, pp.2797-2805, 2005.

R. Meder, T. Trung, L. Schimleck, and L. Schimleck, Seeing the Wood in the Trees: Unleashing the Secrets of Wood via near Infrared Spectroscopy, J. Near Infrared Spectrosc, vol.18, issue.3, p.50, 2010.

G. M. Downes, R. Meder, R. Luff, and F. Catela, Quality Assessment of Australian Woodchips Project 4: Rapid Field-Based Assessment of Pulpwood Quality in Standing Trees, CSIRO FFP Client Report, 1658.

G. M. Downes, R. Meder, N. Ebdon, D. Menz, and C. Hicks, Quality Assessment of Australian Woodchips Project 5: Field-Based Application of Acoustic Velocity and NIR as Predictors of Pulp Quality Across Site and Species

R. Meder, J. T. Brawner, G. M. Downes, and N. Ebdon, Towards the in-forest Assessment of Kraft Pulp Yield: Comparing the Performance of Laboratory and Hand-Held Instruments and Their Value in Screening Breeding Trials, J. Near Infrared Spectrosc, vol.19, pp.421-429, 2011.

A. Muneri, T. Asada, K. Tomita, K. Kusunoki, and C. Szota, Between-tree variation in stem volume, wood density, fibre length and Kraft pulping properties of Eucalyptus globulus and the utility of field-portable NIR Spectroscopy and wood cores in evaluating pulpwood quality properties of standing trees, Appita J, vol.64, pp.356-361, 2011.

G. Giroud, J. Begin, M. Defo, and C. H. Ung, Regional variation in wood density and modulus of elasticity of Quebec's main boreal tree species, For. Ecol. Manag, vol.400, pp.289-299, 2017.

R. Evans, A variance approach to the x ray diffractometric estimation of microfibril angle in wood, Appita J, vol.52, pp.283-289, 1999.

D. M. Smith, Microscopic Methods for Determining Cross-Sectional Cell Dimensions, 1967.

R. Evans, Wood stiffness by x-ray diffractometry, In Characterisation of the Cellulosic Cell Wall

D. Stokke and L. Groom, , pp.138-146, 2006.

K. J. Allen, D. M. Drew, G. M. Downes, R. Evans, E. R. Cook et al., A strong regional temperature signal in low-elevation Huon pine, J. Quat. Sci, vol.28, pp.433-438, 2013.

K. J. Allen, E. R. Cook, R. Evans, R. Francey, B. M. Buckley et al., Lack of cool, not warm, extremes distinguishes late 20th Century climate in 979-year Tasmanian summer temperature reconstruction, Environ. Res. Lett, vol.13, p.34041, 2018.

G. M. Downes, R. Wimmer, and R. Evans, Understanding wood formation: Gains to commercial forestry through tree-ring research, vol.20, pp.37-51, 2002.

G. M. Downes, J. G. Nyakuengama, R. Evans, R. N. Northway, P. Blakemore et al., Relationship between wood density, microfibril angle and stiffness in thinned and fertilized Pinus radiata (D. Don), IAWA J, vol.23, pp.253-266, 2002.

D. M. Drew, G. M. Downes, and R. Evans, Short-term growth responses and associated wood density fluctuations in variously irrigated Eucalyptus globulus, Trees, vol.25, pp.153-161, 2010.

D. M. Drew, K. Allen, G. M. Downes, R. Evans, M. Battaglia et al., Wood properties in a long-lived conifer reveal strong climate signals where ring-width series do not, Tree Physiol, vol.33, pp.37-47, 2013.

R. Evans, G. M. Downes, and J. O. Murphy, Application of new wood characterisation technology to dendrochronology, Proceedings of the Tree Rings, Environment and Humanity, pp.17-21, 1996.

A. J. O'donnell, K. J. Allen, R. M. Evans, E. R. Cook, V. Trouet et al., Wood density provides new opportunities for reconstructing past temperature variability from southeastern Australian trees, Glob. Planet. Chang, vol.141, pp.1-11, 2016.

J. Read, R. Evans, G. D. Sanson, S. Kerr, and T. Jaffré, Wood properties and trunk allometry of co-occurring rainforest canopy trees in a cyclone-prone environment, Am. J. Bot, vol.98, pp.1762-1772, 2011.
URL : https://hal.archives-ouvertes.fr/halsde-00677699

K. Andreassen, I. Børja, L. Dalsgaard, B. Karlsson, M. Tollefsrud et al., Wood density as a screening trait for drought sensitivity in Norway spruce, Can. J. For. Res, vol.44, pp.154-161, 2014.

S. Rosner, S. Luss, J. Sv?tlík, K. Andreassen, I. Børja et al., Chronology of hydraulic vulnerability in trunk wood of conifer trees with and without symptoms of top dieback, J. Plant Hydraul, vol.3, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01256362

S. Rosner, J. Sv?tlík, K. Andreassen, I. Børja, L. Dalsgaard et al., Novel Hydraulic Vulnerability Proxies for a Boreal Conifer Species Reveal That Opportunists May Have Lower Survival Prospects under Extreme Climatic Events. Front, Plant Sci, vol.7, p.229, 2016.

S. Rosner, N. Gierlinger, M. Klepsch, B. Karlsson, R. Evans et al., Hydraulic and mechanical dysfunction of Norway spruce sapwood due to extreme summer drought in Scandinavia, For. Ecol. Manag, vol.409, pp.527-540, 2018.

R. Wimmer, G. M. Downes, and R. Evans, High-resolution analysis of radial growth and wood density in Eucalyptus nitens, grown under different irrigation regimes, Ann. For. Sci, vol.59, pp.519-524, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00881901

G. M. Downes, R. Wimmer, and R. Evans, Temporal variation of microfibril angle in Eucalyptus nitens grown in different irrigation regimes, Tree Physiol, vol.22, pp.449-457, 2002.

R. Wimmer, G. Downes, R. Evans, and J. French, Effects of site on fibre, kraft pulp and handsheet properties of Eucalyptus globulus, Ann. For. Sci, vol.65, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00883404

J. Xu, J. Lü, F. Bao, R. Huang, X. Liu et al., Response of wood density of Picea crassifolia to climate change in Qilian Mountains of North-Western China, J. Beijing For. Univ, vol.33, pp.115-121, 2011.

H. S. Dungey, A. C. Matheson, D. Kain, and R. Evans, Genetics of wood stiffness and its component traits in Pinus radiata, Can. J. For. Res, vol.36, pp.1165-1178, 2006.

B. S. Baltunis, H. X. Wu, and M. B. Powell, Inheritance of density, microfibril angle, and modulus of elasticity in juvenile wood of Pinus radiata at two locations in Australia, Can. J. For. Res, vol.37, pp.2164-2174, 2007.

H. Lindström, R. Evans, and M. Reale, Implications of selecting tree clones with high modulus of elasticity, N. Z. J. For. Sci, vol.35, pp.50-71, 2005.

H. Lindström, P. Harris, C. T. Sorensson, and R. Evans, Stiffness and wood variation of 3-year-old Pinus radiata clones, Wood Sci. Technol, vol.38, pp.579-597, 2005.

C. P. Macmillan, S. D. Mansfield, Z. H. Stachurski, R. Evans, and S. G. Southerton, Fasciclin-like arabinogalactan proteins: Specialization for stem biomechanics and cell wall architecture in Arabidopsis and Eucalyptus, Plant J, vol.62, pp.689-703, 2010.

J. G. Nyakuengama, R. Evans, A. C. Matheson, D. J. Spencer, and P. Vinden, Wood quality and quantitative genetics of Pinus radiata. Fibre traits and wood density, Appita J, vol.52, pp.348-357, 1999.

J. G. Nyakuengama, A. C. Matheson, R. Evans, D. J. Spencer, and P. Vinden, Effect of age on genetic control of Pinus radiata earlywood and latewood properties, Appita J, vol.53, pp.103-107, 2000.

C. J. Shelbourne, R. Evans, R. P. Kibblewhite, and C. Low, Inheritance of tracheid transverse dimensions and wood density in radiata pine, Appita J, vol.50, pp.46-50, 1997.

V. Vikram, M. L. Cherry, D. Briggs, D. W. Cress, R. Evans et al., Stiffness of Douglas-fir lumber: Effects of wood properties and genetics, Can. J. For. Res, vol.41, pp.1160-1173, 2011.

C. Sorensson, D. J. Cown, H. S. Dungey, M. S. Watt, and R. Evans, Determining the main and interactive effect of age and clone on wood density, microfibril angle, and modulus of elasticity for Pinus radiata, Can. J. For. Res, vol.40, pp.1550-1557, 2010.

C. Buksnowitz, U. Müller, R. Evans, A. Teischinger, and M. Grabner, The potential of SilviScan's X-ray diffractometry method for the rapid assessment of spiral grain in softwood, evaluated by goniometric measurements, Wood Sci. Technol, vol.42, pp.95-102, 2008.

F. Chen and R. Evans, A robust approach for vessel identification and quantification in eucalypt pulpwoods, Appita J, vol.58, pp.442-447, 2005.

F. F. Chen and R. Evans, Automated measurement of vessel properties in birch and poplar wood, Holzforschung, vol.64, pp.369-374, 2010.

R. Evans, Rapid Measurement of the Transverse Dimensions of Tracheids in Radial Wood Sections from Pinus radiata, Holzforschung, vol.48, pp.168-172, 1994.

R. Evans, G. M. Downes, D. N. Menz, and S. L. Stringer, Rapid measurement of variation in tracheid transverse dimensions in a radiata pine tree, Appita J, vol.48, pp.134-138, 1995.

R. Evans, S. Stuart, and J. Van-der-touw, Microfibril angle scanning of increment cores by x-ray densitometry, Appita J, vol.49, pp.411-414, 1996.

R. Evans, Rapid scanning of microfibril angle in increment cores by x ray diffractometry, Proceedings of the IAWA/IUFRO International Workshop on the Significance of Microfibril Angle to Wood Quality, pp.21-25, 1997.

R. Evans, M. Hughes, and D. Menz, Microfibril angle variation by scanning x ray diffractometry, Appita J, vol.52, pp.363-367, 1999.

R. Evans and J. Ilic, Rapid prediction of wood stiffness from microfibril angle and density. For, Prod. J, vol.51, pp.53-57, 2011.

T. E. Gureyev, R. Evans, S. Stuart, and M. Cholewa, Quasi-one-dimensional tomography, J. Opt. Soc. Am, vol.13, 1996.

T. E. Gureyev and R. Evans, An extension to quasi-one-dimensional tomography, Appl. Opt, vol.37, pp.26-28, 1998.

T. E. Gureyev and R. Evans, Tomography of objects with a priori known internal geometry, Inverse Probl, vol.14, pp.1469-1480, 1998.

T. E. Gureyev and R. Evans, A method for measuring vessel-free density distribution in hardwoods, Wood Sci. Technol, vol.33, pp.31-42, 1999.

T. Gureyev and R. Evans, A new method for rapid measurement of vessel-free density distribution in hardwoods, Appita J, vol.52, pp.226-230, 2000.

D. Keunecke, D. Mannes, P. Niemz, E. Lehmann, and R. Evans, SilviScan vs. neutron imaging to generate radial softwood density profiles, vol.55, pp.49-59, 2010.

J. M. Long, A. Conn, W. J. Batchelor, and R. Evans, Comparison of methods to measure fibril angle in wood fibres, Appita J, vol.53, pp.206-209, 2000.

S. Stuart and R. Evans, X-ray diffraction estimation of the microfibril angle variation in eucalypt increment cores, Appita J, vol.48, pp.197-200, 1995.

J. L. Yang and R. Evans, Prediction of MOE of eucalypt wood from microfibril angle and density. Holz als Roh und Werkstoff, vol.61, pp.449-452, 2003.

G. M. Downes, R. Evans, R. Wimmer, J. French, A. Farrington et al., pulp and handsheet relationships in plantation grown E. globulus, Appita J, vol.56, pp.221-228, 2003.

R. Evans, R. P. Kibblewhite, and S. Stringer, Kraft pulp fibre property prediction from wood properties in eleven radiata pine clones, Appita J, vol.50, pp.25-33, 1997.

R. Evans, R. P. Kibblewhite, and M. Lausberg, Relationships between wood and pulp properties of twenty-five 13-year-old radiata pine trees, Appita J, vol.52, pp.132-139, 1999.

T. G. Jones, S. R. Corson, and R. Evans, Relationships between wood and PRMP properties of 14-year-old radiata pine trees, Appita J, vol.54, pp.210-216, 2001.

R. P. Kibblewhite, R. Evans, and M. J. Riddell, Handsheet property prediction from kraft fibre and wood tracheid properties in eleven radiata pine clones, Appita J, vol.50, pp.131-138, 1997.

R. P. Kibblewhite, R. Evans, and M. J. Riddell, Prediction of whole-tree radiata pine kraft tracheid/fibre length from pith-to-bark strips taken 1.4 m from ground, Appita J, vol.55, pp.213-219, 2002.

R. P. Kibblewhite, R. Evans, and M. J. Riddell, Kraft handsheet, and wood tracheid and chemical property interrelationships for 50 individual radiata pine trees, Appita J, vol.56, pp.229-233, 2003.

R. P. Kibblewhite, R. Evans, and M. J. Riddell, Interrelationships between kraft handsheet, and wood fibre and chemical properties for the trees and logs of 29 Eucalyptus fastigata and 29 E. nitens, Appita J, vol.57, pp.317-325, 2004.

R. P. Kibblewhite, R. Evans, J. C. Grace, and M. J. Riddell, Fibre length, microfibril angle and wood colour variation and interrelationships for two radiata pine trees with mild and severe compression wood, Appita J, vol.58, pp.316-322, 2005.

R. Wimmer, G. Downes, R. Evans, G. Rasmussen, and J. French, Direct Effects of Wood Characteristics on Pulp and Handsheet Properties of Eucalyptus globulus, Holzforschung, vol.56, pp.244-252, 2002.

R. Evans, S. L. Stringer, and R. P. Kibblewhite, Variation in microfibril angle, density and fibre orientation in twenty-nine Eucalyptus nitens trees, Appita J, vol.53, pp.450-457, 2001.

W. Hillis, R. Evans, and R. Washusen, An unusual formation of tension wood in a natural forest Acacia sp, Holzforschung, vol.58, pp.241-245, 2004.

D. Keunecke, R. Evans, and P. Niemz, Microstructural properties of common yew and Norway spruce determined with SilviScan, IAWA J, vol.30, pp.165-178, 2009.

R. P. Kibblewhite, R. Evans, M. J. Riddell, and C. J. Shelbourne, Changes in density and wood-fibre properties with height position in 15/16-year-old Eucalyptus nitens and E. fastigata, Appita J, vol.57, pp.240-247, 2004.

R. P. Kibblewhite, I. D. Suckling, R. Evans, J. C. Grace, and M. J. Riddell, Lignin and carbohydrate variation with earlywood, latewood, and compression wood content of bent and straight ramets of a radiata pine clone, Holzforschung, vol.64, pp.101-109, 2010.

B. Lachenbruch, G. R. Johnson, G. M. Downes, and R. Evans, Relationships of density, microfibril angle, and sound velocity with stiffness and strength in mature wood of Douglas-fir, Can. J. For. Res, vol.40, pp.55-64, 2010.

B. Lachenbruch, J. R. Moore, and R. Evans, Radial Variation in Wood Structure and Function in Woody Plants, and Hypotheses for Its Occurrence, Tree Physiol, vol.4, pp.121-164, 2011.

C. Lanvermann, R. Evans, U. Schmitt, S. Hering, and P. Niemz, Distribution of structure and lignin within growth rings of Norway spruce, Wood Sci. Technol, vol.47, pp.627-641, 2013.

C. P. Macmillan, P. J. O'donnell, A. Smit, R. Evans, Z. H. Stachurski et al., A survey of the natural variation in biomechanical and cell wall properties in inflorescence stems reveals new insights into the utility of Arabidopsis as a wood model, Funct. Plant Boil, vol.40, pp.662-676, 2013.

J. P. Mclean, R. Evans, and J. R. Moore, Predicting the longitudinal modulus of elasticity of Sitka spruce from cellulose orientation and abundance, Holzforschung, vol.64, pp.495-500, 2010.

L. Mishnaevsky, P. Freere, R. Sharma, P. Brøndsted, H. Qing et al., Strength and Reliability of Wood for the Components of Low-cost Wind Turbines: Computational and Experimental Analysis and Applications, vol.33, pp.183-196, 2009.

R. Washusen and R. Evans, Prediction of shrinkage in solid-wood during drying from cellulose crystallite width in one 11-year-old tree of, Eucalyptus globulus Labill. Aust. For, vol.64, pp.123-126, 2001.

R. Washusen and R. Evans, The association between cellulose crystallite width and tension wood occurrence in Eucalyptus globulus Labill, IAWA J, vol.22, pp.235-243, 2001.

R. Washusen, P. Ades, R. Evans, J. Ilic, and P. Vinden, Relationships between Density, Shrinkage, Extractives Content and Microfibril Angle in Tension Wood from Three Provenances of 10-Year-Old Eucalyptus globulus Labill, Holzforschung, vol.55, pp.176-182, 2001.

R. Washusen, R. Evans, and S. Southerton, A study of Eucalyptus grandis and E. globulus branch wood microstructure, IAWA J, vol.26, pp.203-210, 2005.

P. Xu, L. A. Donaldson, J. C. Walker, R. Evans, and G. Downes, low-stiffness wood in radiata pine butt log part 1: Effects of density and microfibril angle on the vertical variation of wood stiffness, Holzforschung, vol.58, pp.273-286, 2004.

J. L. Yang, J. Ilic, R. Evans, and D. Fife, Interrelationships between shrinkage properties, microfibril angle and cellulose crystallite width in 10-year old, Eucalyptus globulus Labill. N. Z. J. For. Sci, vol.33, pp.47-61, 2003.

J. L. Yang, H. Bailleres, R. Evans, and G. Downes, Evaluating growth strain of Eucalyptus globulus Labill. from SilviScan measurements, Holzforschung, vol.60, pp.574-579, 2006.

C. A. Raymond and L. R. Schimleck, Development of near infrared reflectance analysis calibrations for estimating genetic parameters for cellulose content in Eucalyptus globulus, Can. J. For. Res, vol.32, pp.170-176, 2002.

A. F. Wallis, R. Evans, R. H. Newman, U. C. Roick, and I. D. Suckling, Changes in Cellulose Crystallinity During Kraft Pulping. Comparison of Infrared, X-ray Diffraction and Solid State NMR Results, Holzforschung, vol.49, pp.498-504, 1995.

L. R. Schimleck, R. Evans, and J. Ilic, Estimation of Eucalyptus delegatensis wood properties by NIR spectroscopy, Can. J. For. Res, vol.31, pp.1671-1675, 2001.

L. R. Schimleck, R. Evans, and A. C. Matheson, Estimation of Pinus radiata D. Don clear wood properties by near-infrared spectroscopy, J. Wood Sci, vol.48, pp.132-137, 2002.

L. R. Schimleck and R. Evans, Estimation of wood stiffness of increment cores by near infrared spectroscopy: The development and application of calibrations based on selected cores, IAWA J, vol.23, pp.217-224, 2002.

L. R. Schimleck and R. Evans, estimation of microfibril angle of increment cores by near infrared spectroscopy, IAWA J, vol.23, pp.225-234, 2002.

L. R. Schimleck, A. C. Matheson, R. Evans, and J. Ilic, Estimation of wood stiffness of increment cores by near-infrared spectroscopy, Can. J. For. Res, vol.32, pp.129-135, 2002.

L. R. Schimleck and R. Evans, Estimation of air-dry density of increment cores by near infrared spectroscopy, Appita J, vol.56, pp.312-317, 2003.

L. R. Schimleck and R. Evans, Estimation of P. radiata D. Don tracheid morphological characteristics by near infrared spectroscopy, Holzforschung, vol.58, pp.66-73, 2004.

L. R. Schimleck, G. M. Downes, and R. Evans, Estimation of Eucalyptus nitens wood properties by near infrared spectroscopy, Appita J, vol.59, p.50, 2006.

L. R. Schimleck, C. Espey, C. R. Mora, R. Evans, A. Taylor et al., Characterization of the wood quality of pernambuco (Caesalpinia echinata Lam) by measurements of density, extractives content, microfibril angle, stiffness, color, and NIR spectroscopy, Holzforschung, vol.63, pp.457-463, 2009.

D. J. Stackpole, R. E. Vaillancourt, A. Alves, J. Rodrigues, and B. M. Potts, Genetic Variation in the Chemical Components of Eucalyptus globulus Wood, G3 Genes|Genomes|Genetics, vol.1, pp.151-159, 2011.

C. Raymond, L. Schimleck, A. Muneri, and A. J. Mitchell, Genetic parameters and genotype-by-environment interactions for pulp yield predicted using near infrared reflectance analysis and pulp productivity in Eucalyptus globulus, For. Genet, vol.8, pp.213-224, 2001.

F. S. Poke and C. A. Raymond, Predicting Extractives, Lignin, and Cellulose Contents Using Near Infrared Spectroscopy on Solid Wood in Eucalyptus globulus, J. Wood Chem. Technol, vol.26, pp.187-199, 2006.

L. R. Schimleck, P. D. Kube, and A. C. Raymond, Genetic improvement of kraft pulp yield in Eucalyptus nitens using cellulose content determined by near infrared spectroscopy, Can. J. For. Res, vol.34, pp.2363-2370, 2004.

J. T. Brawner, R. Meder, M. Dieters, and D. J. Lee, Selection of Corymbia citriodora for pulp productivity. South For, vol.74, pp.121-131, 2012.

T. D. Hung, J. T. Brawner, R. Meder, D. J. Lee, S. Southerton et al., Estimates of genetic parameters for growth and wood properties in Eucalyptus pellita F. Muell. to support tree breeding in Vietnam, Ann. For. Sci, vol.72, pp.205-217, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01284171

A. L. Healey, G. Downes, M. Herberling, P. L. Gore, and C. M. Hardner, Improving prediction accuracy and selection of open-pollinated seed-lots in Eucalyptus dunnii Maiden using a multivariate mixed model approach, Ann. For. Sci, vol.73, pp.1035-1046, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01636691

M. Varghese, C. E. Harwood, D. J. Bush, B. Baltunis, R. Kamalakannan et al., Growth and wood properties of natural provenances, local seed sources and clones of Eucalyptus camaldulensis in southern India: Implications for breeding and deployment, vol.48, pp.67-82, 2017.

D. D. Perez, A. Guillemain, P. Alazard, C. Plomion, P. Rozenberg et al., Improvement of Pinus pinaster Ait elite trees selection by combining near infrared spectroscopy and genetic tools, Holzforschung, vol.61, pp.611-622, 2007.

K. Thamarus, K. Groom, A. Bradley, C. A. Raymond, L. R. Schimleck et al., Identification of quantitative trait loci for wood and fibre properties in two full-sib pedigrees of Eucalyptus globulus, Theor. Appl. Genet, vol.109, pp.856-864, 2004.

J. S. Freeman, S. P. Whittock, B. M. Potts, and R. E. Vaillancourt, QTL influencing growth and wood properties in Eucalyptus globulus, Tree Genet. Genomes, vol.5, pp.713-722, 2009.

J. S. Freeman, B. M. Potts, G. M. Downes, D. Pilbeam, S. Thavamanikumar et al., Stability of quantitative trait loci for growth and wood properties across multiple pedigrees and environments inEucalyptus globulus, New Phytol, vol.198, pp.1121-1134, 2013.

B. R. Thumma, B. A. Matheson, D. Zhang, C. Meeske, R. Meder et al., Identification of a Cis-Acting Regulatory Polymorphism in a Eucalypt COBRA-Like Gene Affecting Cellulose Content, Genetics, vol.183, pp.1153-1164, 2009.

B. R. Thumma, S. G. Southerton, J. C. Bell, J. V. Owen, M. L. Henery et al., Quantitative trait locus (QTL) analysis of wood quality traits in Eucalyptus nitens, Tree Genet. Genomes, vol.6, pp.305-317, 2010.

S. G. Southerton, C. P. Macmillan, J. C. Bell, N. Bhuiyan, G. Dowries et al., Association of allelic variation in xylem genes with wood properties in Eucalyptus nitens, Aust. For, vol.73, pp.259-264, 2010.

S. Thavamanikumar, L. J. Mcmanus, P. K. Ades, G. Bossinger, D. J. Stackpole et al., Association mapping for wood quality and growth traits in Eucalyptus globulus ssp. globulus Labill identifies nine stable marker-trait associations for seven traits, Tree Genet. Genomes, vol.10, pp.1661-1678, 2014.

L. Schimleck, C. A. Raymond, C. L. Beadle, G. M. Downes, P. D. Kube et al., Applications of NIR spectroscopy to forest research, Appita J, vol.53, pp.458-464, 2000.

G. Downes, R. Meder, C. Hicks, and N. Ebdon, Developing and evaluating a multisite and multispecies NIR calibration for the prediction of Kraft pulp yield in eucalypts, South. For. J. For. Sci, vol.71, pp.155-164, 2009.

C. R. Mora and L. R. Schimleck, On the selection of samples for multivariate regression analysis: Application to near-infrared (NIR) calibration models for the prediction of pulp yield inEucalyptus nitens, Can. J. For. Res, vol.38, pp.2626-2634, 2008.

G. Downes, R. Meder, C. Harwood, and . Multi-site, Multi-Species near Infrared Calibration for the Prediction of Cellulose Content in Eucalypt Woodmeal, J. Near Infrared Spectrosc, vol.18, pp.381-387, 2010.

G. M. Downes, R. Meder, H. Bond, N. Ebdon, C. Hicks et al., Measurement of cellulose content, Kraft pulp yield and basic density in eucalypt woodmeal using multisite and multispecies near infra-red spectroscopic calibrations, South. For. J. For. Sci, vol.73, pp.181-186, 2011.

L. R. Schimleck, G. F. Peter, R. F. Daniels, A. C. Iii, and P. D. Jones, Nondestructive estimation of Pinus taeda L. wood properties for samples from a wide range of sites in Georgia, Can. J. For. Res, vol.35, pp.85-92, 2005.

L. R. Schimleck and A. J. Michell, Determination of within-tree variation of kraft pulp yield using near-infrared spectroscopy, Tappi J, vol.81, pp.229-236, 1998.

G. M. Downes, R. Meder, N. Ebdon, H. Bond, R. Evans et al., Radial Variation in Cellulose Content and Kraft Pulp Yield in Eucalyptus Nitens using Near-Infrared Spectral Analysis of Air-Dry Wood Surfaces, J. Near Infrared Spectrosc, vol.18, pp.147-154, 2010.

G. M. Downes, C. E. Harwood, J. Wiedemann, N. Ebdon, H. Bond et al., Radial variation in Kraft pulp yield and cellulose content in Eucalyptus globulus wood across three contrasting sites predicted by near infrared spectroscopy, Can. J. For. Res, vol.42, pp.1577-1586, 2012.

R. Meder, D. Marston, N. Ebdon, and R. Evans, Spatially-Resolved Radial Scanning of Tree Increment Cores for near Infrared Prediction of Microfibril Angle and Chemical Composition, J. Near Infrared Spectrosc, vol.18, pp.499-505, 2010.

N. Gierlinger and R. Wimmer, Radial distribution of heartwood extractives and lignin in mature European larch, Wood Fiber Sci, vol.36, pp.387-394, 2004.

M. Wentzel-vietheer, R. Washusen, G. M. Downes, C. Harwood, N. Ebdon et al., Prediction of non-recoverable collapse in Eucalyptus globulus from near infrared scanning of radial wood samples, Eur. J. Wood Wood Prod, vol.71, pp.755-768, 2013.

C. R. Mora and L. R. Schimleck, Determination of within-tree variation of Pinus taeda wood properties by near infrared spectroscopy. Part 2: Whole-tree wood property maps, Appita J, vol.62, pp.232-238, 2009.

S. Lundqvist, F. Ekenstedt, O. Hedenberg, and A. Twaddle, Wood and fiber properties of loblolly pine in the southeast USA. Variations and prediction models, Proceedings of the 5th Workshop, Connection Between Forest Resources and Wood Quality: Modelling Approaches and Simulation Software, pp.20-27, 2005.

G. M. Downes, M. Touza, and C. Harwood, Wentzel-Vietheer, M. NIR detection of non-recoverable collapse in sawn boards of Eucalyptus globulus, Holz als Roh und Werkstiff, vol.72, pp.563-570, 2014.

A. Thumm, M. Riddell, B. Nanayakkara, J. Harrington, and R. Meder, Near Infrared Hyperspectral Imaging Applied to Mapping Chemical Composition in Wood Samples, J. Near Infrared Spectrosc, vol.18, pp.507-515, 2010.

A. Thumm, M. Riddell, B. Nanayakkara, J. Harrington, and R. Meder, Mapping Within-Stem Variation of Chemical Composition by near Infrared Hyperspectral Imaging, J. Near Infrared Spectrosc, vol.24, pp.605-616, 2016.

F. Antony, L. Jordan, L. R. Schimleck, R. F. Daniels, and A. Clark, The effect of mid-rotation fertilization on the wood properties of loblolly pine (Pinus taeda L.), IAWA J, vol.30, pp.49-58, 2009.

V. Bucur, An ultrasonic method for measuring the elastic constants of wood increment cores bored from living trees, Ultrasonics, vol.21, pp.116-126, 1983.

F. Divós and T. Tanaka, Effects of Creep on Modulus of Elasticity Determination of Wood, J. Vib. Acoust, vol.122, pp.90-92, 2000.

R. G. Payton, Wave fronts in wood, Q. J. Mech. Appl. Math, vol.56, pp.527-546, 2003.

H. Unterwieser and G. Schickhofer, Influence of moisture content of wood on sound velocity and dynamic MOE of natural frequency-and ultrasonic runtime measurement, Eur. J. Wood Prod, vol.69, pp.171-181, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00594483

Z. Li, D. Yang, S. Liu, S. Yu, M. Lu et al., Broadband gradient impedance matching using an acoustic metamaterial for ultrasonic transducers

Y. Fang, L. Lin, H. Feng, Z. Lu, and G. W. Emms, Review of the use of air-coupled ultrasonic technologies for nondestructive testing of wood and wood products, Comput. Electron. Agric, vol.137, pp.79-87, 2017.

D. Hutchins, Ultrasonic Generation by Pulsed Lasers, Phys. Acoust, vol.18, pp.21-123, 1988.

E. G. Mason, M. Hayes, and N. Pink, Validation of ultrasonic velocity estimates of wood properties in discs of radiata pine, N. Z. J. For. Sci, vol.47, 2017.

J. Dahlen, D. Auty, T. L. Eberhardt, E. Turnblom, E. Lowell et al., Assessing the within-tree variation in stiffness from ultrasonic velocity and specific gravity measurements in Douglas-fir and loblolly pine, Proceedings of the 21st International Nondestructive Testing and Evaluation of Wood Symposium, pp.24-27, 2019.

J. J. Harrington, Heirarchical Modelling of Softwood Hygro-Elastic Properties, 2002.

G. Johansson, R. Kliger, and M. Perstorper, Quality of structural timber-product specification system required by end-users. Holz als Roh und Werkstoff, vol.52, pp.42-48, 1994.

M. Perstorper, P. Pellicane, I. Kliger, and G. Johansson, Quality of timber products from Norway spruce Part 1. Optimization, key variables and experimental study, Wood Sci. Technol, vol.29, pp.157-170, 1995.

M. Johansson, M. Perstorper, R. Kliger, and G. Johansson, Distortion of Norway spruce timber Part 2. Modelling twist. Holz als Roh und Werkstoff, vol.59, pp.155-162, 2001.

R. Kliger, M. Johansson, M. Perstorper, and G. Johansson, Distortion of Norway spruce timber Part 3. Modelling bow and spring. Holz als Roh und Werkstoff, vol.61, pp.241-250, 2003.

M. Perstorper, P. Pellicane, I. Kliger, and G. Johansson, Quality of timber products from Norway spruce Part 3. Influence of spatial position and growth characteristics on bending stiffness and strength, Wood Sci. Technol, vol.29, pp.339-352, 1995.

S. Ormarsson, Numerical Analysis of Moisture-Related Distortions in Sawn Timber, 1999.

P. Xu, H. Liu, R. Evans, and L. A. Donaldson, Longitudinal shrinkage behaviour of compression wood in radiata pine, Wood Sci. Technol, vol.43, pp.423-439, 2009.

J. M. Harris and B. A. Meylan, The influence of microfibril angle on longitudinal shrinkage and tangential shrinkage in Pinus radiata, Holzforschung, vol.19, pp.144-153, 1965.

B. A. Meylan, Cause of high longitudinal shrinkage in wood. For, Prod. J, vol.18, pp.75-78, 1968.

B. A. Meylan, The influence of microfibril angle on the longitudinal shrinkage-moisture content relationship, Wood Sci. Technol, vol.6, pp.293-301, 1972.

S. Pang, Predicting anisotropic shringkage of softwood Part 1: Theories, Wood Sci. Technol, vol.36, pp.75-91, 2002.

M. Riddell, D. Cown, J. Harrington, J. Lee, and J. Moore, Assessing Spiral Grain Angle by Light Transmission: Proof of Concept, IAWA J, vol.33, pp.1-14, 2012.

M. Johansson and S. Ormarsson, Influence of growth stresses and material properties on distortion of sawn timber-Numerical investigation, Ann. For. Sci, vol.66, pp.1-10, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00883520

M. O. Kimberley, J. R. Moore, and H. S. Dungey, Modelling the effects of genetic improvement on radiata pine wood density, N. Z. J. For. Sci, vol.46, p.241, 2016.

J. R. Moore, D. J. Cown, R. B. Mckinley, and C. O. Sabatia, Effects of stand density and seedlot on three wood properties of young radiata pine grown at a dry-land site in New Zealand, N. Z. J. For. Sci, 2015.

V. Cnudde and M. N. Boone, High-resolution X-ray computed tomography in geosciences: A review of the current technology and applications, Earth Sci. Rev, vol.123, pp.1-17, 2013.

G. N. Hounsfield, Computerized transverse axial scanning (tomography): Part 1. Description of system, Br. J. Radiol, vol.46, pp.1016-1022, 1973.

J. Van-den-bulcke, E. L. Wernersson, M. Dierick, D. Van-loo, B. Masschaele et al., 3D tree-ring analysis using helical X-ray tomography, vol.32, pp.39-46, 2014.

J. Bastin, A. Fayolle, Y. Tarelkin, J. V. Bulcke, T. De-haulleville et al., Wood Specific Gravity Variations and Biomass of Central African Tree Species: The Simple Choice of the Outer Wood, PLoS ONE, vol.10, 2015.

T. De-mil, W. Hubau, B. Angoboy-ilondea, M. A. Rocha-vargas, P. Boeckx et al., Asynchronous leaf and cambial phenology in a tree species of the Congo Basin requires space-time conversion of wood traits, Ann. Bot, 2019.

M. Dierick, D. Van-loo, B. Masschaele, J. V. Bulcke, J. Van-acker et al., Recent micro-CT scanner developments at UGCT, Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms, vol.324, pp.35-40, 2014.

M. Onoe, J. W. Tsao, H. Yamada, H. Nakamura, J. Kogure et al., Computed tomography for measuring the annual rings of a live tree, Nucl. Instrum. Methods Phys. Res, vol.221, pp.213-220, 1984.

C. Freyburger, F. Longuetaud, F. Mothe, T. Constant, and J. M. Leban, Measuring wood density by means of X-ray computer tomography, Ann. For. Sci, vol.66, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00883536

P. Jacquin, F. Mothe, F. Longuetaud, A. Billard, B. Kerfriden et al., A software for fast measurement of wood density on increment cores by, C.T. scanning. Comput. Electron. Agric, vol.156, pp.606-617, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02154562

P. Jacquin, F. Longuetaud, J. Leban, and F. Mothe, X-ray microdensitometry of wood: A review of existing principles and devices, vol.42, pp.42-50, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01597871

T. De-mil, A. Vannoppen, H. Beeckman, J. Van-acker, and J. Van-den-bulcke, A field-to-desktop toolchain for X-ray, C.T. densitometry enables tree ring analysis, Ann. Bot, vol.117, pp.1187-1196, 2016.

J. Van-den-bulcke, M. A. Boone, J. Dhaene, D. Van-loo, L. Van-hoorebeke et al., scanning can boost tree-ring research for earth-system sciences, Ann. Bot, 2019.

A. Vannoppen, P. Boeckx, T. De-mil, V. Kint, Q. Ponette et al., Climate driven trends in tree biomass increment show asynchronous dependence on tree-ring width and wood density variation, vol.48, pp.40-51, 2018.

M. Vanhellemont, R. Sousa-silva, S. L. Maes, J. V. Bulcke, L. Hertzog et al., Distinct growth responses to drought for oak and beech in temperate mixed forests, Sci. Total. Environ, vol.650, pp.3017-3026, 2019.

S. L. Maes, M. P. Perring, M. Vanhellemont, L. Depauw, J. Van-den-bulcke et al., Environmental drivers interactively affect individual tree growth across temperate European forests, Glob. Chang. Biol, vol.25, pp.201-217, 2019.

T. De-mil, B. A. Ilondea, S. Maginet, J. Duvillier, J. Van-acker et al., Van den Bulcke, J. Cambial activity in the understory of the Mayombe forest, vol.31, pp.49-61, 2017.

J. Van-camp, M. Hubeau, J. Van-den-bulcke, J. Van-acker, and K. Steppe, Cambial pinning relates wood anatomy to ecophysiology in the African tropical tree Maesopsis eminii, Tree Physiol, vol.38, pp.232-242, 2017.

B. Masschaele, M. Dierick, D. Van-loo, M. N. Boone, L. Brabant et al., HECTOR: A 240kV micro-CT setup optimized for research, J. Phys. Conf. Ser, vol.463, 2013.

K. Svedström, J. Lucenius, J. V. Bulcke, D. Van-loo, P. Immerzeel et al., Hierarchical structure of juvenile hybrid aspen xylem revealed using X-ray scattering and microtomography, Trees, vol.26, pp.1793-1804, 2012.

N. J. Brereton, F. Ahmed, D. Sykes, M. J. Ray, I. Shield et al., X-ray micro-computed tomography in willow reveals tissue patterning of reaction wood and delay in programmed cell death, BMC Plant Boil, vol.15, 2015.

J. Van-den-bulcke, M. Boone, J. Van-acker, M. Stevens, and L. Van-hoorebeke, X-ray tomography as a tool for detailed anatomical analysis, Ann. For. Sci, vol.66, pp.1-12, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00883486

C. R. Brodersen, Visualizing wood anatomy in three dimensions with high-resolution X-ray micro-tomography (µCT)-A review, IAWA J, vol.34, pp.408-424, 2013.

T. Koddenberg and H. Militz, Morphological imaging and quantification of axial xylem tissue in Fraxinus excelsior L. through X-ray micro-computed tomography, vol.111, pp.28-35, 2018.

F. G. Wagner, F. W. Taylor, D. S. Ladd, C. W. Mcmillin, F. L. Roder et al., scanning of an oak log for internal defects, vol.39, pp.62-64, 1989.

Q. Wei, B. Leblon, and A. La-rocque, On the use of X-ray computed tomography for determining wood properties: A review, Can. J. For. Res, vol.41, p.50, 2011.

Y. H. Chui, Q. Wei, S. Y. Zhang, and B. Leblon, Reconstruction of 3D images of internal log characteristics by means of successive 2D log computed tomography images, Holzforschung, vol.63, pp.575-580, 2009.

A. Krähenbühl, B. Kerautret, I. Debled-rennesson, F. Longuetaud, and F. Mothe, Knot Detection in X-Ray, C.T. Images of Wood, Proceedings of the Computer Vision-ECCV, pp.7-13, 2012.

J. R. Roussel, F. Mothe, A. Krähenbühl, and B. Kerautret, Debled-Rennesson, I.; Longuetaud, F. Automatic knot segmentation in, C.T. images of wet softwood logs using a tangential approach, Comput. Electron. Agric, vol.104, pp.46-56, 2014.

J. Cool, I. Duchesne, D. Belley, and M. Fredriksson, Knot detection in computed tomography images of partially dried jack pine (Pinus banksiana) and white spruce (Picea glauca) logs from a Nelder type plantation, Can. J. For. Res, vol.47, pp.910-915, 2017.

H. Boukadida, F. Longuetaud, F. Colin, C. Freyburger, T. Constant et al., PithExtract: A robust algorithm for pith detection in computer tomography images of wood -Application to 125 logs from 17 tree species, Comput. Electron. Agric, vol.85, pp.90-98, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01003417

P. Sepúlveda, D. E. Kline, and J. Oja, Prediction of fiber orientation in Norway spruce logs using an X-ray log scanner: A preliminary study, Wood Fiber Sci, vol.35, pp.421-428, 2007.

P. Sepúlveda, J. Oja, and A. Grönlund, Predicting spiral grain by computed tomography of Norway spruce, J. Wood Sci, vol.48, pp.479-483, 2002.

A. J. Petutschnigg, M. Flach, and H. Katz, Decay recognition for spruce in CT-images. Holz als Roh und Werkstoff, vol.60, pp.219-223, 2002.

Y. Hattori and Y. Kanagawa, Non-destructive measurement of moisture distribution in wood with a medical X-ray, C.T. scanner, 1: Accuracy and influencing factors, Mokuzai Gakkaishi, vol.31, pp.974-982, 1985.

Y. An and G. S. Schajer, Geometry-based, C.T. scanner for measuring logs in sawmills, Comput. Electron. Agric, vol.105, pp.66-73, 2014.

M. Fredriksson, Optimizing sawing of boards for furniture production using, C.T. log scanning. J. Wood Sci, vol.61, pp.474-480, 2015.

A. Rais, E. Ursella, E. Vicario, and F. Giudiceandrea, The use of the first industrial X-ray, C.T. scanner increases the lumber recovery value: Case study on visually strength-graded Douglas-fir timber, Ann. For. Sci, vol.74, 2017.

F. Longuetaud, F. Mothe, M. Fournier, J. Dlouhá, P. Santenoise et al., Within-stem maps of wood density and water content for characterization of species: A case study on three hardwood and two softwood species, Ann. For. Sci, vol.73, pp.601-614, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01379663

S. M. Stängle, F. Brüchert, U. Kretschmer, H. Spiecker, and U. H. Sauter, Clear wood content in standing trees predicted from branch scar measurements with terrestrial LiDAR and verified with X-ray computed tomography, Can. J. For. Res, vol.44, pp.145-153, 2013.

J. Oja, S. Grundberg, and A. Grönlund, Predicting the Stiffness of Sawn Products by X-ray Scanning of Norway Spruce Saw Logs, Scand. J. For. Res, vol.16, pp.88-96, 2001.

J. Song, O. Brendel, C. Bodénès, C. Plomion, A. Kremer et al., X-ray computed tomography to decipher the genetic architecture of tree branching traits: Oak as a case study, Tree Genet. Genomes, vol.13, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01530800

L. Bjorklund and H. Petersson, Predicting Knot Diameter of Pinus sylvestris in Sweden, Scand. J. For. Res, vol.14, pp.376-384, 1999.

K. Iiyama and A. F. Wallis, An improved acetyl bromide procedure for determining lignin in woods and wood pulps, Wood Sci. Technol, vol.22, pp.271-280, 1988.

J. Rodrigues, O. Faix, and H. Pereira, Improvement of the acetylbromide method for lignin determination within large scale screening programmes, Holz als Roh und Werkstoff, vol.57, pp.341-345, 1999.

A. Sluiter, B. Hames, R. Ruiz, C. Scarlata, J. Sluiter et al., Determination of structural carbohydrates and lignin in biomass, Lab. Anal. Proc, vol.1617, pp.1-16, 2008.

S. Kelley, Rapid analysis of the chemical composition of agricultural fibers using near infrared spectroscopy and pyrolysis molecular beam mass spectrometry, Biomass Bioenergy, vol.27, pp.77-88, 2004.

T. G. Rials, S. S. Kelley, Z. Cheng, J. Kim, and Y. Li, FT-IR imaging and pyrolysis-molecular beam mass spectrometry: New tools to investigate wood tissues, Wood Sci. Technol, vol.39, pp.61-76, 2005.

R. Sykes, B. Kodrzycki, G. Tuskan, K. Foutz, and M. Davis, Within tree variability of lignin composition in Populus, Wood Sci. Technol, vol.42, p.50, 2008.

L. Xiao, H. Wei, M. E. Himmel, H. Jameel, and S. S. Kelley, NIR and Py-mbms coupled with multivariate data analysis as a high-throughput biomass characterization technique: A review. Front, Plant Sci, vol.5, 2014.

G. L. Franklin, Preparation of Thin Sections of Synthetic Resins and Wood-Resin Composites, and a New Macerating Method for Wood, Nature, vol.155, p.51, 1945.

D. Guay, N. R. Sutherland, W. Rantanen, N. Malandri, A. Stephens et al., Comparison of fiber length analyzers, Proceedings of the TAPPI Practical Papermaking Conference, pp.22-26, 2005.

U. Hirn and W. Bauer, A review of image analysis based methods to evaluate fiber properties, vol.86, pp.96-105, 2006.

Z. Chen, K. Abramowicz, R. Raczkowski, S. Ganea, H. X. Wu et al., Method for accurate fiber length determination from increment cores for large-scale population analyses in Norway spruce, Holzforschung, vol.70, pp.829-838, 2016.

M. Nabavi, J. Dahlen, L. Schimleck, T. L. Eberhardt, and C. Montes, Regional calibration models for predicting loblolly pine tracheid properties using near-infrared spectroscopy, Wood Sci. Technol, vol.52, pp.445-463, 2018.

R. P. Kibblewhite and R. Evans, Dimensional relationships among radiata pine wood tracheid, and chemical and TMP pulp fibres, Appita J, vol.54, pp.297-303, 2001.

J. T. Ladell, A new method of measuring tracheid length, Forestry, vol.32, pp.124-125, 1959.

A. P. Wilkins and R. K. Bamber, A comparison between Ladell's wood section method and the macerated wood method for tracheid length determination, IAWA Bull, vol.4, pp.245-247, 1983.

H. Gärtner, P. Cherubini, P. Fonti, G. Von-arx, L. Schneider et al., A Technical Perspective in Modern Tree-ring Research-How to Overcome Dendroecological and Wood Anatomical Challenges, J. Vis. Exp, vol.97, 2015.

G. Von-arx, A. Crivellaro, A. L. Prendin, K. ?ufar, and M. Carrer, Quantitative wood anatomy-Practical guidelines, Front. Plant Sci, vol.7, p.781, 2016.

H. Gärtner and D. Nievergelt, The core-microtome: A new tool for surface preparation on cores and time series analysis of varying cell parameters, vol.28, pp.85-92, 2010.

H. Gärtner, S. Lucchinetti, and F. Schweingruber, New perspectives for wood anatomical analysis in dendrosciences: The GSL1-microtome. Dendrochronologia, vol.32, pp.47-51, 2014.

G. Von-arx and M. Carrer, ROXAS-A new tool to build centuries-long tracheid-lumen chronologies in conifers, vol.32, pp.290-293, 2014.

C. L. Huang, N. P. Kutscha, G. J. Leaf, and R. A. Megraw, Comparison of microfibril angle measurement techniques, Proceedings of the IAWA/IUFRO International Workshop on the Significance of Microfibril Angle to Wood Quality, pp.21-25, 1997.

P. R. Hein, J. Bouvet, E. Mandrou, P. Vigneron, B. Clair et al., Age trends of microfibril angle inheritance and their genetic and environmental correlations with growth, density and chemical properties in Eucalyptus urophylla S.T. Blake wood, Ann. For. Sci, vol.69, pp.681-691, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00684768

S. Cramer, D. Kretschmann, R. Lakes, and T. Schmidt, Earlywood and latewood elastic properties in loblolly pine, Holzforschung, vol.59, pp.531-538, 2005.

T. M. Gorman, D. ;-e-kretschmann, D. W. Green, and M. C. Wiemann, Effect of site characteristics on juvenile wood transition in lodgepole pine in the inland northwest, Wood Fiber Sci, vol.50, pp.180-192, 2018.

D. Amishev and G. E. Murphy, Implementing Resonance-Based Acoustic Technology on Mechanical Harvesters/Processors for Real-Time Wood Stiffness Assessment: Opportunities and Considerations, Int. J. For. Eng, vol.19, pp.48-56, 2008.

P. Carter, X. Wang, and R. J. Ross, Field application of processor head acoustic technology in forest harvest operations, Proceedings of the 18th International Nondestructive Testing and Evaluation of Wood Symposium, pp.24-27, 2013.

J. Burger and A. Gowen, Data handling in hyperspectral image analysis, Chemom. Intell. Lab. Syst, vol.108, pp.13-22, 2011.

O. Lindgren and T. Seifert, Du Plessis, A. Moisture content measurements in wood using dual-energy, C.T. scanning-A feasibility study, Wood Mater. Sci. Eng, vol.11, pp.1-6, 2016.

N. Defoirdt, A. Sen, J. Dhaene, T. De-mil, H. Pereira et al., A generic platform for hyperspectral mapping of wood, Wood Sci. Technol, vol.51, pp.887-907, 2017.

B. Laforce, B. Masschaele, M. N. Boone, D. Schaubroeck, M. Dierick et al., Integrated Three-Dimensional Microanalysis Combining X-Ray Microtomography and X-Ray Fluorescence Methodologies, Anal. Chem, vol.89, pp.10617-10624, 2017.

C. A. Raymond, L. R. Schimleck, A. Muneri, and A. J. Michell, Nondestructive sampling of Eucalyptus globulus and E. nitens for wood properties. III. Predicted pulp yield using near infrared reflectance analysis, Wood Sci. Technol, vol.35, pp.203-215, 2001.

L. R. Schimleck, C. Mora, and R. F. Daniels, Estimation of the physical wood properties of green Pinus taeda radial samples by near infrared spectroscopy, Can. J. For. Res, vol.33, pp.2297-2305, 2003.

Y. Li, L. A. Apiolaza, and C. Altaner, Genetic variation in heartwood properties and growth traits of Eucalyptus bosistoana, Eur. J. For. Res, vol.137, pp.565-572, 2018.

T. D. Walker, F. Isik, and S. Mckeand, Genetic Variation in Acoustic Time of Flight and Drill Resistance of Juvenile Wood in a Large Loblolly Pine Breeding Population, © 2019 by the authors. Licensee MDPI, vol.65, pp.469-482, 2019.