S. H. Chien, G. Carmona, L. I. Prochnow, and E. R. Austin, Cadmium availability from granulated and bulk-blended phosphate-potassium fertilizers, Journal of Environmental Quality, vol.32, pp.1911-1914, 2003.

K. Saleh and P. Guigon, Coating and encapsulation processes in powder technology, Handbook of Powder Technology, Granulation, vol.11, pp.323-375, 2007.

E. Rondet, M. Delalonde, T. Ruiz, and J. P. Desfoursb, Fractal formation description of agglomeration in low shear mixer, Chemical Engineering Journal, vol.164, pp.212-219, 1971.

A. Nosrati, J. Addai-mensah, and D. J. Robinson, Drum agglomeration behavior of nickel laterite ore: Effect of process variables, Hydrometallurgy, vol.125, issue.126, pp.90-99, 2012.

K. V. Sastry, P. Dontula, and C. Hosten, Investigation of the layering mechanism of agglomerate growth during drum pelletization, Powder Technology, vol.130, pp.231-237, 2003.

R. Aguado, S. Roudier, and L. Delagado, Best available techniques (BAT) reference document for iron and steel production, 2013.

G. M. Walker, Chapter 4 Drum Granulation Processes, Handbook of Powder Technology, vol.11, pp.219-254, 2007.

K. Saleh and P. Guigon, Coating and encapsulation processes in powder technology, Handbook of Powder Technology, Granulation, vol.11, pp.323-375, 2007.

P. Suresh, I. Sreedhar, R. Vaidhiswaran, and A. Venugopal, Acomprehensive review on process and engineering aspects of pharmaceutical wet granulation, Chemical Engineering Journal, vol.328, pp.785-815, 2017.

S. M. Iveson, J. D. Litster, K. Hapgood, and B. J. Ennis, Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review, Powder Technology, vol.117, issue.1, pp.3-39, 2001.

S. Herminghaus, Dynamics of wet granular matter, Advances in Physics, vol.54, issue.3, pp.221-261, 2005.

J. Litster and B. Ennis, The Science and Engineering of Granulation Processes, p.15, 2014.

C. Liao, S. Hsiau, and S. Wen, Effect of adding a small amount of liquid on density-induced wet granular segregation in a rotating drum, Advanced Powder Technology, vol.27, issue.4, pp.1265-1271, 2016.

S. Iveson and J. Litster, Growth regime map for liquid-bound granules, AIChE journal, vol.44, issue.7, pp.1510-1518, 1998.

X. Xiao, Y. Tan, H. Zhang, R. Deng, and S. Jiang, Experimental and dem studies on the particle mixing performance in rotating drums: Effect of area ratio, Powder Technology, vol.314, pp.182-194, 2017.

B. Alchikh-sulaiman, M. Alian, F. Ein-mozaffari, A. Lohi, and S. R. Upreti, Using the discrete element method to assess the mixing of polydisperse solid particles in a rotary drum, Particuology, vol.25, pp.133-142, 2016.

A. Bouwman, M. Henstra, D. Westerman, J. Chung, Z. Zhang et al., The effect of the amount of binder liquid on the granulation mechanisms and structure of microcrystalline cellulose granules prepared by high shear granulation, International Journal of Pharmaceutics, vol.290, issue.1, pp.129-136, 2005.

J. Degre've, J. Baeyens, M. V. De-velden, and S. D. Laet, Spray-agglomeration of npk-fertilizer in a rotating drum granulator, Powder Technology, vol.163, issue.3, pp.188-195, 2006.

J. D. Osborne, R. P. Sochon, J. J. Cartwright, D. G. Doughty, M. J. Hounslow et al., Binder addition methods and binder distribution in high shear and fluidised bed granulation, Chemical Engineering Research and Design, vol.89, issue.5, pp.553-559, 2011.

S. K. Pawar, F. Henrikson, G. Finotello, J. T. Padding, N. G. Deen et al., An experimental study of dropletparticle collisions, Powder Technology, vol.300, pp.157-163, 2016.

R. Pashminehazar, A. Kharaghani, and E. Tsotsas, Three dimensional characterization of morphology and internal structure of soft material agglomerates produced in spray fluidized bed by x-ray tomography, Powder Technology, vol.300, pp.46-60, 2016.

B. J. Ennis, G. Tardos, and R. Pfeffer, A microlevel-based characterization of granulation phenomena, Powder Technology, vol.65, issue.1, pp.257-272, 1991.

F. Stepanek, P. Rajniak, C. Mancinelli, R. Chern, and R. Ramachandran, Distribution and accessibility of binder in wet granules, Powder Technology, vol.189, issue.2, pp.376-384, 2009.

N. Rahmanian, A. Naji, and M. Ghadiri, Effects of process parameters on granules properties produced in a high shear granulator, Chemical Engineering Research and Design, vol.89, issue.5, pp.512-518, 2011.

B. J. Ennis, Agglomeration and size enlargement session summary paper, Powder Technology, vol.88, issue.3, pp.203-225, 1996.

M. Butensky and D. Hyman, Rotary drum granulation. an experimental study of the factors affecting granule size, Ind. Eng. Chem. Fundam, vol.10, pp.212-219, 1971.

K. E. Ileleji, Y. Li, R. K. Ambrose, and P. H. Doane, Experimental investigations towards understanding important parameters in wet drum granulation of corn stover biomass, Powder Technology, vol.300, pp.126-135, 2016.

R. Ramachandran, J. M. Poon, C. F. Sanders, T. Glaser, C. D. Immanuel et al., Experimental studies on distributions of granule size, binder content and porosity in batch drum granulation: Inferences on process modeling requirements and process sensitivities, Powder Technology, vol.188, issue.2, pp.89-101, 2008.

J. P. Pan, T. J. Wang, J. J. Yao, and Y. Jin, Granule transport and mean residence time in horizontal drum with inclined flights, Powder Technology, vol.162, issue.1, pp.50-58, 2006.

R. Spurling, J. Davidson, and D. Scott, The transient response of granular flows in an inclined rotating cylinder, Chemical Engineering Research and Design, vol.79, issue.1, pp.51-61, 2001.

F. Wang and I. Cameron, A multi-form modeling approach to the dynamics and control of drum granulation processes, Powder Technology, vol.179, issue.1, pp.2-11, 2007.

J. M. Gray, Granular flow in partially filled slowly rotating drums, Journal of Fluid Mechanics, vol.441, pp.1-29, 2001.

C. Thornton and Z. Ning, A theoretical model for the stick/bounce behaviour of adhesive, elastic-plastic spheres, Powder Technology, vol.99, issue.2, pp.154-162, 1998.

L. X. Liu, J. D. Litster, S. M. Iveson, and B. J. Ennis, Coalescence of deformable granules in wet granulation processes, AIChE Journal, vol.46, pp.529-539, 2000.

S. Iveson, J. Beathe, and N. Page, The dynamic strength of partially saturated powder compacts: the effect of liquid properties, Powder Technology, vol.127, pp.149-161, 2002.

M. Ghadiri, A. D. Salman, M. Hounslow, A. Hassanpour, and D. W. York, Editorial: Special issue ? agglomeration, Chemical Engineering Research and Design, vol.89, issue.5, p.499, 2011.

J. Rojek, S. Nosewicz, M. Mazdziarz, P. Kowalczyk, K. Wawrzyk et al., Modeling of a sintering process at various scales, Procedia Engineering, vol.177, pp.263-270, 2017.

. Gdr-midi, On dense granular flows, Eur. Phys. J. E, vol.14, pp.341-365, 2004.

K. Kamrin and D. L. Henann, Nonlocal modeling of granular flows down inclines, Soft Matter, vol.11, pp.179-185, 2015.

L. Amarsid, J. Delenne, P. Mutabaruka, Y. Monerie, F. Perales et al., Viscoinertial regime of immersed granular flows, Phys. Rev. E, vol.96, p.12901, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01607197

I. Govender, Granular flows in rotating drums: A rheological perspective, Minerals Engineering, vol.92, pp.168-175, 2016.

R. Yang, A. Yu, L. Mcelroy, and J. Bao, Numerical simulation of particle dynamics in different flow regimes in a rotating drum, Powder Technology, vol.188, issue.2, pp.170-177, 2008.

J. Mellmann, The transverse motion of solids in rotating cylinders?forms of motion and transition behavior, Powder technology, vol.118, issue.3, pp.251-270, 2001.

G. Lian, C. Thornton, and M. Adams, A theoretical study of the liquid bridge forces between two rigid spherical bodies, Journal of Colloid and Interface Science, vol.161, pp.138-147, 1993.

M. Scheel, R. Seemann, M. Brinkmann, M. D. Michiel, A. Sheppard et al., Liquid distribution and cohesion in wet granular assemblies beyond the capillary bridge regime, Journal of Physics: Condensed Matter, vol.20, issue.49, p.494236, 2008.

C. Willett, M. Adans, S. Johnson, and J. Seville, Capillary bridges between two spherical bodies, Langmuir, vol.16, pp.9396-9405, 2000.

J. Delenne, V. Richefeu, and F. Radjai, Liquid clustering and capillary pressure in granular media, Journal of Fluid Mechanics, vol.762
URL : https://hal.archives-ouvertes.fr/hal-01223545

F. Radjai and F. Dubois, Discrete-element modeling of granular materials, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00691805

I. Talu, G. I. Tardos, and M. I. Khan, Computer simulation of wet granulation, Powder Technology, vol.110, pp.59-75, 2000.

E. L. Chan, K. Washino, G. K. Reynolds, B. Gururajan, M. J. Hounslow et al., Blade-granule bed stress in a cylindrical high shear granulator: Further characterisation using dem, Powder Technology, vol.300, pp.92-106, 2016.

P. Lau and M. Kind, Cfd-pbe simulation to predict particle growth in a fluidized bed melt granulation batch process, Powder Technology, vol.300, pp.28-36, 2016.

S. Sarkar and B. Chaudhuri, Dem modeling of high shear wet granulation of a simple system, Asian Journal of Pharmaceutical Sciences, vol.13, pp.220-228, 2018.

D. Barrasso, A. Tamrakar, and R. Ramachandran, A reduced order pbm?ann model of a multi-scale pbm?dem description of a wet granulation process, Chemical Engineering Science, vol.119, pp.319-329, 2014.

V. Richefeu, M. S. El-youssoufi, E. Aze?ma, and F. Radjai, Force transmission in dry and wet granular media, Powder Technology, vol.190, pp.258-263, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00193866

H. Matuttis, S. Luding, and H. Herrmann, Discrete element simulations of dense packings and heaps made of spherical and non-spherical particles, Powder Technology, vol.109, issue.1, pp.278-292, 2000.

C. Thornton, Numerical simulations of deviatoric shear deformation of granular media, Geotechnique, vol.50, issue.1, pp.43-53, 2000.

F. Radjai, I. Preechawuttipong, and R. Peyroux, Cohesive granular texture, Continuous and discontinuous modeling of cohesive frictional materials, pp.148-159, 2001.

H. J. Herrmann and S. Luding, Modeling granular media with the computer, Continuum Mechanics and Thermodynamics, vol.10, pp.189-231, 1998.

G. Lefebvre and P. Jop, Erosion dynamics of a wet granular medium, Physical Review E : Statistical, Nonlinear, and Soft Matter Physics, vol.8, p.32205, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00876461

J. Duran, A. Reisinger, and P. De-gennes, Sands, Powders, and Grains: An Introduction to the Physics of Granular Materials, Partially Ordered Systems, 1999.

V. Richefeu, M. E. Youssoufi, F. Radjai, and F. , Shear strength properties of wet granular materials, Physical Review E, vol.73, p.51304, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00022654

T. Vo, P. Mutabaruka, J. Delenne, S. Nezamabadi, and F. Radjai, Strength of wet agglomerates of spherical particles: effects of friction and size distribution, EPJ Web Conf, vol.140, p.8021, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01563611

V. Richefeu, F. Radjai, and M. S. Youssoufi, Stress transmission in wet granular materials, Eur. Phys. J. E, vol.21, pp.359-369, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00123719

J. Scha?fer, S. Dippel, and D. E. Wolf, Force schemes in simulations of granular materials, J. Phys. I France, vol.6, pp.5-20, 1996.

S. Dippel, G. G. Batrouni, and D. E. Wolf, How transversal fluctuations affect the friction of a particle on a rough incline, Phys. Rev. E, vol.56, pp.3645-3656, 1997.

S. Luding, Collisions and contacts between two particles, Physics of dry granular media -NATO ASI Series E350, p.285, 1998.

V. Richefeu, M. S. El-youssoufi, F. Radja, and ?. , Shear strength of unsaturated soils: Experiments, dem simulations, and micromechanical analysis, pp.83-91, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00147621

T. Vo, P. Mutabaruka, S. Nezamabadi, J. Delenne, E. Izard et al., Mechanical strength of wet particle agglomerates, vol.92, pp.1-7, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01863416

F. Radjai and V. Richefeu, Bond anisotropy and cohesion of wet granular materials, Philosophical Transactions of the Royal Society A, vol.367, pp.5123-5138, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00689863

J. Happel and H. Brenner, Low Reynolds Number Hydrodynamics, 1983.

C. Voivret, F. Radja??, J. Delenne, and M. S. Youssoufi, Space-filling properties of polydisperse granular media, Physical Review E : Statistical, Nonlinear, and Soft Matter Physic, vol.76, p.21301, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00759644

C. Voivret, F. Radjai, J. Delenne, and M. S. Youssoufi, Multiscale force networks in highly polydisperse granular media, Physical Review Letter, vol.102, p.178001, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00689872

P. Y. Liu, R. Y. Yang, and A. B. Yu, The effect of liquids on radial segregation of granular mixtures in rotating drums, Granular Matter, vol.15, issue.4, pp.427-436, 2013.