B. Anselmetti, Generation of functional tolerancing based on positioning features, Computer-Aided Design, vol.38, issue.8, pp.902-919, 2006.
DOI : 10.1016/j.cad.2006.05.005

B. Anselmetti, Calcul tridimensionnel de la r??sultante d'une cha??ne de cotes en cotation ISO, en vue d'un calcul probabiliste, Mécanique et Industrie, pp.173-185, 2007.
DOI : 10.1051/meca:2007036

B. Anselmetti, CLIC: a method for geometrical specification of products Geometric Tolerancing of Product, pp.209-239, 2010.

E. Ballot, P. Bourdet, and F. Et-thiébaut, Determination of relative situations of parts for tolerance computation, Proc. of the 7th CIRP Seminar on Computer Aided Tolerancing, pp.63-72, 1995.
DOI : 10.1007/978-94-017-1691-8_7

. Ballu, Choice of functional specifications using graphs within the frame work of education, Proc. of the 6th CIRP Seminar on Computer Aided Tolerancing Kluwer academic publisher, pp.197-206, 1999.

A. Ballu, L. Mathieu, and O. Et-legoff, Representation of mechanical assemblies and specifications by graphs Geometric Tolerancing of Product, pp.97-110, 2010.

. Barki, Contributing vertices-based Minkowski sum computation of convex polyhedra, Computer-Aided Design, vol.41, issue.7, pp.525-538, 2009.
DOI : 10.1016/j.cad.2009.03.008
URL : https://hal.archives-ouvertes.fr/hal-01437644

C. Berge, Théorie des graphes et ses applications, 1967.

P. Bourdet and E. Et-ballot, Geometrical Behavior Laws for Computer-aided Tolerancing, Proc. of the 4th CIRP Seminar on Computer Aided Tolerancing, pp.143-153, 1995.
DOI : 10.1007/978-94-009-1529-9_8

P. Bourdet, F. Thiébaut, and G. Et-cid, Writing the 3d Chain of Dimensions (Tolerance Stack-Up) in Symbolic Expressions Geometric tolerancing of products, pp.125-149, 2010.

P. Breteau, F. Thiebaut, C. Lartigue, B. Fricero, H. Falgarone et al., Assembly Simulation of Flexible Parts through the fitting of Linkage Devices, Proc. of 10th CIRP International Seminar on Computer Aided Tolerancing, 2007.

P. Breteau, Simulation d'assemblage flexible par la mesure -Application au domaine de l'aéronautique, Thèse de doctorat, 2009.

J. A. Camelio, S. J. Hu, and D. Et-ceglarek, Modeling Variation Propagation of Multi-Station Assembly Systems With Compliant Parts, Journal of Mechanical Design, vol.125, issue.4, pp.673-182, 2003.
DOI : 10.1115/1.1631574

J. A. Camelio, S. J. Hu, and S. P. Et-marin, Compliant Assembly Variation Analysis Using Component Geometric Covariance, Journal of Manufacturing Science and Engineering, vol.126, issue.2, pp.355-360, 2004.
DOI : 10.1115/1.1644553

J. S. Carlson, R. Söderberg, and L. Lindkvist, Geometrical Inspection Point Reduction Based on Combined Cluster and Sensitivity Analysis, Manufacturing, 2003.
DOI : 10.1115/IMECE2003-42308

K. W. Chase and A. R. Et-parkinson, A survey of research in the application of tolerance analysis to the design of mechanical assemblies, Research in Engineering Design, vol.97, issue.7, pp.23-37, 1991.
DOI : 10.1007/BF01580066

H. Falgarone, F. Thiebaut, P. Bourdet, and G. E. Et-moufle, A new approach for best fit assembly based on the behaviour of components, Proc. of Aerospace Manufacturing and Automated Fastening Conference and Exhibition, 2006.

G. Cid, F. Thiebaut, and P. Bourdet, Taking the deformation into account for components' tolerancing, Proc. of the 5th conference on Integrated Design on Manufacturing and Mechanical Engineering, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01226723

J. Dantan and A. Qureshi, Worst-case and statistical tolerance analysis based on quantified constraint satisfaction problems and Monte Carlo simulation, Computer-Aided Design, vol.41, issue.1, pp.1-12, 2009.
DOI : 10.1016/j.cad.2008.11.003

T. L. Defazio, A. C. Edsall, R. E. Gustavson, . Hernandezj, P. M. Hutchins et al., A prototype of feature based design for assembly, Journal of Mechanical Design, vol.1154, pp.723-734, 1993.

Y. Ding, D. Ceglarek, and J. Shi, Modeling and Diagnosis of Multi-Stage Manufacturing Process : Part I State Space Model, Proc. of the Japan/USA Symposium of Flexible Automation, 2000.

Y. Ding, D. Ceglarek, and J. J. Shi, Design Evaluation of Multi-station Assembly Processes by Using State Space Approach, Journal of Mechanical Design, vol.124, issue.3, pp.408-418, 2002.
DOI : 10.1115/1.1485744

Y. Ding, J. J. Shi, and D. Et-ceglarek, Diagnosability Analysis of Multi-Station Manufacturing Processes, Journal of Dynamic Systems, Measurement, and Control, vol.124, issue.1, pp.1-13, 2002.
DOI : 10.1115/1.1435645

J. Dufaure and D. Et-teissandier, A tolerancing framework to support geometric specifications traceability, Int J Adv Manuf Technol, vol.36, pp.9-10894, 2008.

A. Fleming, Geometric relationships between toleranced features Artificial Intelligent, pp.403-412, 1988.
DOI : 10.1016/0004-3702(88)90062-8

K. Fukuda, From the zonotope construction to the Minkowski addition of convex polytopes, Journal of Symbolic Computation, vol.38, issue.4, pp.1261-1272, 2004.
DOI : 10.1016/j.jsc.2003.08.007

F. Germain, Tolérancement statistique tridimensionnel, intégration en CFAO, Thèse de doctorat, 2007.

M. Giordano, D. Duret, S. Tichadou, and R. Et-arrieux, Clearance space in volumic dimensioning, CIRP Annals - Manufacturing Technology, pp.565-568, 1992.

M. Giordano and D. Et-duret, Clearance Space and Deviation Space, Application to three-dimensional chains of dimensions and positions, Proc. of the 3rd CIRP Seminar on Computer Aided Tolerancing, pp.179-196, 1993.

M. Giordano, E. Pairel, and S. Et-samper, Analyse et synthèse de tolérances : méthode des domaines, Tolérancement géométrique des produits, pp.161-193, 2007.

J. M. Hervé, La géométrie du groupe des déplacements appliquée à l'analyse cinématique des mécanismes, Thèse d'Etat, 1976.

S. J. Hu and J. A. Et-camelio, Modeling and Control of Compliant Assembly Systems, CIRP Annals - Manufacturing Technology, vol.55, issue.1, pp.19-22, 2006.
DOI : 10.1016/S0007-8506(07)60357-6

L. Lindkvist and R. Söderberg, Computer-aided tolerance chain and stability analysis, Journal of Engineering Design, vol.14, issue.1, pp.17-39, 2003.
DOI : 10.1080/0954482031000078117

S. C. Liu, S. J. Hu, and T. C. Et-woo, Tolerance Analysis for Sheet Metal Assemblies, Journal of Mechanical Design, vol.118, issue.1, pp.62-67, 1996.
DOI : 10.1115/1.2826857

S. C. Liu and S. J. Hu, Variation Simulation for Deformable Sheet Metal Assemblies Using Finite Element Methods, Journal of Manufacturing Science and Engineering, vol.119, issue.3, pp.368-374, 1997.
DOI : 10.1115/1.2831115

G. Mandil, A. Desrochers, and A. Et-rivière, Computational Methodology for the Prediction of Functional Requirement Variations Across the Product Life-Cycle
URL : https://hal.archives-ouvertes.fr/hal-00381625

G. Mandil, A. Desrochers, and A. Et-rivière, Framework for the Monitoring of Functional Requirements Along the Product Life Cycle, Proc. of 6th Conception et Production Intégrées, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00426416

B. Marguet, H. Falgarone, and N. Et-chevassus, AnaTole: un outil d'analyse 3d des variations géométriques pour la conception de produit aéronautique. Revue internationale de CFAO et d'informatique graphique, pp.113-122, 2003.

M. Mounaud, F. Thiebaut, P. Bourdet, H. Falgarone, and N. Et-chevassus, Integrating the flexibility of components in the assembly of aeronautics hydraulic systems, Proc. of 10th CIRP International Seminar on Computer Aided Tolerancing, 2007.

M. Mounaud, F. Thiebaut, P. Bourdet, H. Falgarone, and N. Chevassus, Assembly sequence influence on geometric deviations propagation of compliant parts, Proc. of 11th CIRP International Seminar on Computer Aided Tolerancing, 2009.
DOI : 10.1080/00207540802178091

. Mujezinovi, A New Mathematical Model for Geometric Tolerances as Applied to Polygonal Faces, Journal of Mechanical Design, vol.126, issue.3, pp.504-518, 2004.
DOI : 10.1115/1.1701881

S. D. Nigam and J. U. Turner, Review of statistical approaches to tolerance analysis, Computer-Aided Design, vol.27, issue.1, pp.6-15, 1995.
DOI : 10.1016/0010-4485(95)90748-5

J. Petit, S. Samper, and M. Et-giordano, Minimum clearance for tolerancing analysis of vacuum pump, In proc, of the 8th CIRP International Seminar on Computer Aided Tolerancing, 2003.

L. Pierre, D. Teissandier, and J. Nadeau, Analyse des tolérances géométriques dans un contexte multiexpertises , application à une turbine de moteur d'hélicoptère, Congrès Français de Mécanique, 2007.

L. Pierre, D. Teissandier, and J. Nadeau, Integration of thermomechanical strains into tolerancing analysis, International Journal on Interactive Design and Manufacturing (IJIDeM), vol.36, issue.9???10, pp.247-263, 2009.
DOI : 10.1007/s12008-009-0058-8
URL : https://hal.archives-ouvertes.fr/hal-01019666

L. Pierre, D. Teissandier, and J. Nadeau, Integration of multiple physical behaviours into a geometric tolerancing approach, Proc. of the 11th CIRP Seminar on Computer Aided Tolerancing, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01094189

L. Pierre, D. Teissandier, and J. Nadeau, Qualification of turbine architectures in a multiphysical approach: application to a turboshaft engine, Proc. of the 8th conference on Integrated Design on Manufacturing and Mechanical Engineering, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01094175

M. Pluviose and C. Et-périlhon, Turbomachines : Description et principes de base, Ingénieur, BM, vol.4, issue.280, pp.1-15, 2002.

M. Pluviose and C. Et-périlhon, Turbomachines : Bilan énergétique et applications, Ingénieur, BM, vol.4, issue.283, pp.1-16, 2002.

A. A. Requichaa, Toward a Theory of Geometric Tolerancing, The International Journal of Robotics Research, vol.29, issue.10, pp.45-60, 1983.
DOI : 10.1177/027836498300200403

U. Roy and B. Li, Representation and interpretation of geometric tolerances for polyhedral objects. II., Computer-Aided Design, vol.31, issue.4, pp.273-85, 1999.
DOI : 10.1016/S0010-4485(99)00028-7

S. Samper, Models for tolerancing process by considering mechanism flexibility. Integrated Design and Manufacturing in Mechanical Engineering'96, pp.349-357, 1997.

S. Samper, Taking into account elastic displacements in 3d tolerancing Models and application, Journal of Materials Processing Technology, vol.78, pp.1-3156, 1998.

S. Samper, Simultaneous analysis method for tolerancing flexible mechanisms In Geometric Product Specification and Verification : Integration of Functionality, pp.127-134, 2003.

S. Samper, Elastic clearance domain and use rate concept applications to ball bearings and gears. Models for Computer Aided Tolerancing in Design and Manufacturing, pp.331-340, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00333054

. Serre, Analysis of functional geometrical specification, Proc. of the 7th CIRP Seminar on Computer Aided Tolerancing, 2001.
DOI : 10.1007/978-94-017-1691-8_12

Z. Shen, J. J. Shah, and J. K. Davidson, Analysis neutral data structure for GD&T, Journal of Intelligent Manufacturing, vol.3, issue.1, 2008.
DOI : 10.1007/s10845-008-0096-2

B. Shiu, D. Ceglarek, and J. Shi, Flexible Beam-Based Modeling of Sheet Metal Assembly for Dimensional Control, Transactions of NAMRI/ SME, vol.25, pp.49-54, 1997.

. Skowronski, Using Monte-Carlo variance reduction in statistical tolerance synthesis, Computer-Aided Design, vol.29, issue.1, pp.63-69, 1997.
DOI : 10.1016/S0010-4485(96)00050-4

. Söderberg, Automated Seam Variation and Stability Analysis for Automotive Body System, Proc. of the 7th CIRP Seminar on Computer Aided Tolerancing, pp.255-264, 2001.

. Söderberg, Stability and seam variation analysis for automotive body design, Journal of Engineering Design, vol.13, issue.2, pp.173-187, 2002.
DOI : 10.1080/095448299261371

. Söderberg, Virtual Geometry Assurance for Effective Product Realization, Proc. of the 1st Nordic Conference on Product Lifecycle Management, 2006.

. Söderberg, Improving decision making by simulating and visualizing geometrical variation in non-rigid assemblies, CIRP Annals - Manufacturing Technology, vol.57, issue.1, pp.175-178, 2008.
DOI : 10.1016/j.cirp.2008.03.040

V. Srinivasan, Role of Sweeps in Tolerancing Semantics, In proc, of the International Forum on Dimensional Tolerancing and Metrology, pp.69-78, 1993.

. Teissandier, A computer aided tolerancing model: proportioned assembly clearance volume, Computer-Aided Design, vol.31, issue.13, pp.805-817, 1999.
DOI : 10.1016/S0010-4485(99)00055-X
URL : https://hal.archives-ouvertes.fr/hal-01202586

. Teissandier, Operations on polytopes: application to tolerance analysis, of the 6th CIRP Seminar on Computer Aided Tolerancing Kluwer academic publisher, pp.425-433, 1999.
DOI : 10.1007/978-94-017-1705-2_43
URL : https://hal.archives-ouvertes.fr/hal-00604749

J. U. Turner, Relative positioning of parts in assemblies using mathematical programming, Computer-Aided Design, vol.22, issue.7, pp.394-400, 1990.
DOI : 10.1016/0010-4485(90)90103-J

J. U. Turner, A Feasibility Space Approach for Automated Tolerancing, Journal of Manufacturing Science and Engineering, vol.115, issue.3, pp.341-345, 1993.
DOI : 10.1115/1.2901670

. Wärmefjord, Geometrical Inspection Point Reduction for Rigid and Non-Rigid Parts Using Cluster Analysis -Industrial Verification, Proc. of the 10th CIRP Seminar on Computer Aided Tolerancing, 2007.

K. Wärmefjord, J. S. Carlson, and R. Söderberg, A Measure of the Information Loss for Inspection Point Reduction, Journal of Manufacturing Science and Engineering, vol.131, issue.5, 2009.
DOI : 10.1115/1.4000105

D. E. Whitney and J. D. Adams, Application of screw theory to analysis of mobility and constraint of mechanisms, Journal of mechanical design, vol.123, issue.1, pp.26-32, 2001.

C. Wickman, R. Söderberg, and L. Lindkvist, Toward non-nominal virtual geometric verification by combining VR and CAT technologies, Proc. Of the 7th CIRP International Seminar on Computer Aided Tolerancing, 2001.
DOI : 10.1007/978-94-017-1691-8_30

C. Wickman and R. Söderber, Comparison of nonnominal geometry models represented in physical versus virtual environments, Journal of Computing and Information Science in Engineering, vol.43, pp.171-177, 2004.

A. Wirtz, Vectorial tolerancing for production quality control and functional analysis in design, Annals of the CIRP, 1991.

Z. Wu and W. H. Et-elmaraghy, Evaluation of cost-tolerance algorithms for design tolerance analysis and synthesis, Journal of Manufacturing Systems, vol.1, pp.168-179, 1998.

Y. Wu, J. J. Shahet, and J. K. Et-davidson, Improvements to algorithms for computing the Minkowski sum of 3-polytopes, Computer-Aided Design, vol.35, issue.13, pp.1181-1192, 2003.
DOI : 10.1016/S0010-4485(03)00023-X

K. Xie, L. Wells, J. A. Camelio, and B. D. Et-youn, Variation Propagation Analysis on Compliant Assemblies Considering Contact Interaction, Journal of Manufacturing Science and Engineering, vol.129, issue.5, pp.934-942, 2007.
DOI : 10.1115/1.2752829

G. Ziegler, Lectures on polytopes, 1995.
DOI : 10.1007/978-1-4613-8431-1