Skip to Main content Skip to Navigation
Journal articles

Simplified heat and mass transfer modeling in a food processing plant

Abstract : Inside a food production plant, bacteria can grow particularly in zones of high humidity leading to deterioration of food quality and safety. Cleaning and disinfection are currently practiced to reduce this hazard. However it is not always efficient; stagnant water is susceptible to be a source of microbial growth. To prevent this problem, drying must be performed but water may still not entirely evaporate at some locations. In order to optimize the drying process, a simplified heat and mass transfer model was developed in this study. Validation was performed by comparing the predicted water weight evolutions with the ones measured in a food processing plant. From model predictions, it was found that by reducing the air inlet relative humidity from 85% to 50%, the time needed to evaporate 90% of the initial water weight could be reduced by a factor of about 1.5. This shows the interest to dry the inlet air.
Document type :
Journal articles
Complete list of metadata

https://hal.inrae.fr/hal-02601926
Contributor : Migration Irstea Publications <>
Submitted on : Saturday, May 16, 2020 - 7:07:35 AM
Last modification on : Tuesday, September 7, 2021 - 3:54:08 PM

Identifiers

Citation

Logan Lecoq, D. Flick, Evelyne Derens, Hong-Minh Hoang, Onrawee Laguerre. Simplified heat and mass transfer modeling in a food processing plant. Journal of Food Engineering, Elsevier, 2016, 171, pp.1-13. ⟨10.1016/j.jfoodeng.2015.09.026⟩. ⟨hal-02601926⟩

Share

Metrics

Record views

68